Material Properties: 316 Stainless
Data Available:
- Thermal Conductivity (Plot unavailable)
- Specific Heat (Plot unavailable)
- Young's Modulus (Plot unavailable)
- Linear Expansion (Plot unavailable)
Thermal Conductivity |
Specific Heat 1 |
Specific Heat 2 |
|
UNITS | W/(m-K) | J/(kg-K) | J/(kg-K) |
a | -1.4087 | 12.2486 | -1879.464 |
b | 1.3982 | -80.6422 | 3643.198 |
c | 0.2543 | 218.743 | 76.70125 |
d | -0.6260 | -308.854 | -6176.028 |
e | 0.2334 | 239.5296 | 7437.6247 |
f | 0.4256 | -89.9982 | -4305.7217 |
g | -0.4658 | 3.15315 | 1382.4627 |
h | 0.1650 | 8.44996 | -237.22704 |
i | -0.0199 | -1.91368 | 17.05262 |
data range |
4-300 | 4-300 | 4-300 |
equation range |
1-300 | 4-50 | 50-300 |
curve fit % error relative to data |
2 | 2 | 2 |
Curve fit equation of the form: log10 y = a+b(log10T) + c(log10T) 2 + d(log10T) 3 + e(log10T) 4 + f(log10T) 5 + g(log10T) 6 + h(log10T) 7 + i(log10T) 8 Solves as: y = 10 a+b(log10T) + c(log10T) 2 + d(log10T) 3 + e(log10T) 4 + f(log10T) 5 + g(log10T) 6 + h(log10T) 7 + i(log10T) 8 Where: Coefficients a - i are summarized in the appropriate table and T is the temperature in K (x-axis), and y is the property to solve for. |
Young's Modulus | Young's Modulus | Linear expansion | |
.Units |
GPa | GPa | [(L-L293)/L293] x 105 unitless, eg. m/m |
a |
2.084729E2 | 2.079488E2 | -2.9554E2 |
b |
-1.358965E-1 | 7.394241E-2 | -3.9811E-1 |
c |
8.368629E-3 | -9.627200E-4 | 9.2683E-3 |
d |
-1.381700E-4 | 2.845560E-6 | -2.0261E-5 |
e |
6.831930E-7 | -3.240800E-9 | 1.7127E-8 |
Tlow (K) |
. | . | 23 |
f> |
. | . | -300.04 |
data range (K) |
5-60 | 48-294 | 4-300 |
equation range (K) |
8-50 | 50-294 | 4-300 |
curve fit % error relative to data |
1 | 1 | 5 |
equation of the form: | |
y = a + bT + cT 2 + dT 3 + eT 4 |
>T > Tlow |
y = f |
T < Tlow |
solves as expected: Where: Coefficients a-e are summarized in the appropriate table and T is the temperature in K (x-axis), and y is the property to solve for. |