Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Volumetric and Viscous Properties at Several Temperatures for Binary Mixtures of N-Methylpiperazine with Methylcyclohexane or n-Heptane

Yang, X.[Xi], Xing, Y.[Yan], Li, D.[Dan], Guo, Y.[Yongsheng], Fang, W.[Wenjun]
J. Chem. Eng. Data 2010, 55, 8, 2914-2916
ABSTRACT
The data of density and viscosity for binary mixtures of N-methylpiperazine (NMP) with methylcyclohexane (MCH) or n-heptane have been measured from T = 298.15 K to T = 313.15 K at atmospheric pressure. Excess volume, VmE, for the binary mixtures are then calculated. Positive values of VmE are observed over the entire composition range, and the maximum value is 0.622 cm3*mol-1 at 313.15 K. The excess results are discussed in terms of the changes of molecular interactions in the mixtures, and the data of VmE are fitted against the composition with the Redlich-Kister type equation. The viscosities have also been correlated with several semiempirical equations. These physical property data and calculations provide valuable information on the development and application of piperazine derivatives.
Compounds
# Formula Name
1 C5H12N2 N-methylpiperazine
2 C7H14 methylcyclohexane
3 C7H16 heptane
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • CAPTUB:UFactor:4
  • 3
  • POMD
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:12
  • 3
  • POMD
  • 2
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • CAPTUB::UFactor:4
  • 3
  • POMD
  • 2
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB::UFactor:12
  • 3
  • POMD
  • 3
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • CAPTUB::UFactor:4
  • 3
  • POMD
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB::UFactor:4
  • 3
  • POMD
  • 2
  • 1
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • CAPTUB:UFactor:4
  • 33
  • POMD
  • 2
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:12
  • 33
  • POMD
  • 1
  • 3
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • CAPTUB:UFactor:4
  • 33
  • POMD
  • 1
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:4
  • 33