Kinematic Viscosity of R410A and R407C Refrigerant-Oil Mixtures in the Saturated Liquid Phase with Lubricant Mass Fraction in the Range of (0 to 0.0001)
The kinematic viscosities of R410A and R407C refrigerant-oil mixtures in the saturated liquid phase were measured at the temperatures ranging from (256.15 to 336.15) K when the mass fractions of lubricant (polyol ester lubricant) were (0, 2, 5, 8, and 10)*10-5. The experimental results show that, with the addition of lubricant, there is a significant impact on the kinematic viscosity of R410A and R407C refrigerant-oil mixtures in the saturated liquid phase. With the increase of lubricant concentration, the liquid kinematic viscosities of R410A and R407C refrigerant-oil mixtures under the saturation condition significantly increase, and the impact of lubricant gradually decreases with the increase of temperature.
Compounds
#
Formula
Name
1
C2HF5
pentafluoroethane
2
CH2F2
difluoromethane
3
C2H2F4
1,1,1,2-tetrafluoroethane
Datasets
The table above is generated from the ThermoML associated json file (link above).
POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied;
the numbers refer to the table of compounds on the left.