Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Study of Solution Properties of Some Alkali Bromides in Aqueous Binary Mixtures of 1,3-Dioxolane in View of Different Models

Roy, M. N.[Mahendra Nath], Ghosh, G.[Gargi], Chakraborti, P.[Palash]
J. Chem. Eng. Data 2010, 55, 4, 1649-1654
ABSTRACT
Viscosity B-coefficients of lithium, sodium, and potassium bromide in (30, 60, and 90) % aqueous 1,3-dioxolane solutions have been determined at (298.15 and 308.15) K from density and viscosity measurements employing the Jones-Dole, Breslau-Miller, and Vand equations. B-coefficients thus obtained were compared. Furthermore, the applicability of the Moulik equation was shown by linear plots of relative viscosity and concentration values in their square terms. It has been found that the B-coefficients vary with the size of the cations, which suggests a structure-promoting tendency for all of the salts and for all of the concentrations.
Compounds
# Formula Name
1 BrLi lithium bromide
2 H2O water
3 BrNa sodium bromide
4 BrK potassium bromide
5 C3H6O2 1,3-dioxolane
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 5
  • Normal boiling temperature, K ; Liquid
  • Liquid
  • Gas
  • Distillation
  • 1
  • POMD
  • 5
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Pycnometric method
  • 1
  • POMD
  • 5
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Capillary tube (Ostwald; Ubbelohde) method
  • 1
  • POMD
  • 5
  • 1
  • 2
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Solvent: Volume fraction - 2; Liquid
  • Molality, mol/kg - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Pycnometric method
  • 54
  • POMD
  • 5
  • 1
  • 2
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Molality, mol/kg - 1; Liquid
  • Solvent: Volume fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Capillary tube (Ostwald; Ubbelohde) method
  • 54
  • POMD
  • 5
  • 3
  • 2
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Solvent: Volume fraction - 2; Liquid
  • Molality, mol/kg - 3; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Pycnometric method
  • 54
  • POMD
  • 5
  • 3
  • 2
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Molality, mol/kg - 3; Liquid
  • Solvent: Volume fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Capillary tube (Ostwald; Ubbelohde) method
  • 54
  • POMD
  • 5
  • 2
  • 4
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Solvent: Volume fraction - 2; Liquid
  • Molality, mol/kg - 4; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Pycnometric method
  • 54
  • POMD
  • 5
  • 2
  • 4
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Molality, mol/kg - 4; Liquid
  • Solvent: Volume fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Capillary tube (Ostwald; Ubbelohde) method
  • 54
  • POMD
  • 5
  • 2
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Volume fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Pycnometric method
  • 6
  • POMD
  • 5
  • 2
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Volume fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Capillary tube (Ostwald; Ubbelohde) method
  • 6