Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Ion-Solvent Interactions of Some Halides of Common Cations with Organic Solvent Mixtures by Conductometric, Volumetric, Viscometric, and Refractometric Techniques

Roy, M. N.[Mahendra Nath], Dewan, R. K., Sarkar, L.[Lovely]
J. Chem. Eng. Data 2010, 55, 3, 1347-1353
ABSTRACT
Electrolytic conductivities, densities, viscosities, and refractive indices of some lithium halides (LiCl, LiBr, and LiI) have been studied in mass fraction (0.10, 0.20, and 0.30) of ethylene glycol monomethyl ether + methyl alcohol mixtures at 303.15 K. The limiting molar conductivities (?0), association constants (KA), and the distance of closest approach of the ion (R) have been evaluated using the Fuoss conductance equation (1978). The Walden product is obtained and discussed. The limiting apparent molar volumes (Vdeg ), experimental slopes (SV*) derived from the Masson equation, and viscosity A and B coefficients using the Jones-Dole equation have been interpreted in terms of ion-ion and ion-solvent interactions, respectively.
Compounds
# Formula Name
1 CH4O methanol
2 C3H8O2 2-methoxyethan-1-ol
3 BrLi lithium bromide
4 ClLi lithium chloride
5 ILi lithium iodide
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Viscosity, Pa*s ; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Capillary tube (Ostwald; Ubbelohde) method
  • 1
  • POMD
  • 1
  • Mass density, kg/m3 ; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Pycnometric method
  • 1
  • POMD
  • 2
  • Viscosity, Pa*s ; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Capillary tube (Ostwald; Ubbelohde) method
  • 1
  • POMD
  • 2
  • Mass density, kg/m3 ; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Pycnometric method
  • 1
  • POMD
  • 1
  • 2
  • Viscosity, Pa*s ; Liquid
  • Mass fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Capillary tube (Ostwald; Ubbelohde) method
  • 5
  • POMD
  • 1
  • 2
  • Mass density, kg/m3 ; Liquid
  • Mass fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Pycnometric method
  • 5
  • POMD
  • 1
  • 2
  • 4
  • Molar conductivity, S*m2/mol ; Liquid
  • Solvent: Mass fraction - 2; Liquid
  • Amount concentration (molarity), mol/dm3 - 4; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • dip-type immersion conductivity cell
  • 30
  • POMD
  • 1
  • 2
  • 4
  • Viscosity, Pa*s ; Liquid
  • Solvent: Mass fraction - 2; Liquid
  • Amount concentration (molarity), mol/dm3 - 4; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Capillary tube (Ostwald; Ubbelohde) method
  • 18
  • POMD
  • 1
  • 2
  • 4
  • Refractive index (Na D-line) ; Liquid
  • Solvent: Mass fraction - 2; Liquid
  • Amount concentration (molarity), mol/dm3 - 4; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 18
  • POMD
  • 1
  • 2
  • 4
  • Mass density, kg/m3 ; Liquid
  • Solvent: Mass fraction - 2; Liquid
  • Amount concentration (molarity), mol/dm3 - 4; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Pycnometric method
  • 18
  • POMD
  • 1
  • 2
  • 3
  • Molar conductivity, S*m2/mol ; Liquid
  • Solvent: Mass fraction - 2; Liquid
  • Amount concentration (molarity), mol/dm3 - 3; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • dip-type immersion conductivity cell
  • 30
  • POMD
  • 1
  • 2
  • 3
  • Viscosity, Pa*s ; Liquid
  • Solvent: Mass fraction - 2; Liquid
  • Amount concentration (molarity), mol/dm3 - 3; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Capillary tube (Ostwald; Ubbelohde) method
  • 18
  • POMD
  • 1
  • 2
  • 3
  • Refractive index (Na D-line) ; Liquid
  • Solvent: Mass fraction - 2; Liquid
  • Amount concentration (molarity), mol/dm3 - 3; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 18
  • POMD
  • 1
  • 2
  • 3
  • Mass density, kg/m3 ; Liquid
  • Solvent: Mass fraction - 2; Liquid
  • Amount concentration (molarity), mol/dm3 - 3; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Pycnometric method
  • 18
  • POMD
  • 1
  • 2
  • 5
  • Molar conductivity, S*m2/mol ; Liquid
  • Solvent: Mass fraction - 2; Liquid
  • Amount concentration (molarity), mol/dm3 - 5; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • dip-type immersion conductivity cell
  • 30
  • POMD
  • 1
  • 2
  • 5
  • Viscosity, Pa*s ; Liquid
  • Solvent: Mass fraction - 2; Liquid
  • Amount concentration (molarity), mol/dm3 - 5; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Capillary tube (Ostwald; Ubbelohde) method
  • 18
  • POMD
  • 1
  • 2
  • 5
  • Refractive index (Na D-line) ; Liquid
  • Solvent: Mass fraction - 2; Liquid
  • Amount concentration (molarity), mol/dm3 - 5; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 18
  • POMD
  • 1
  • 2
  • 5
  • Mass density, kg/m3 ; Liquid
  • Solvent: Mass fraction - 2; Liquid
  • Amount concentration (molarity), mol/dm3 - 5; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Pycnometric method
  • 18