Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Phase Behavior for the Aqueous Two-Phase Systems Containing the Ionic Liquid 1-Butyl-3-methylimidazolium Tetrafluoroborate and Kosmotropic Salts

Chunxiang, L.[Li], Han, J.[Juan], Wang, Y.[Yun], Yan, Y.[Yongsheng], Pan, J.[Jianming], Xu, X.[Xiaohui], Zhang, Z.[Zulei]
J. Chem. Eng. Data 2010, 55, 3, 1087-1092
ABSTRACT
Liquid-liquid equilibria (LLE) for the aqueous 1-butyl-3-methylimidazolium tetrafluoroborate ([Bmim]BF4) + kosmotropic salt (Na3PO4, Na2CO3, Na2SO4, NaH2PO4, NaCl) systems have been determined experimentally at T= 298.15 K and in part at T = (313.15 to 333.15) K. The binodal curves are fitted to an empirical nonlinear expression developed by Merchuk, and the tie lines were described by the Othmer-Tobias and Bancroft equations. Factors affecting the binodal curves such as salts and temperature are also studied. It was found that the salting-out ability of different salts may also be related to the Gibbs energy of hydration of the ions, and the order of salting-out ability of the anions follows the Hofmerister series for the strength of the kosmotropic salts. It was also demonstrated that the two-phase area was expanded with a decrease in temperature. [Bmim]BF4 could be recovered from aqueous solution using the aqueous two-phase system (ATPS), and the recovery efficiency could reach 98.77 %. The recovery efficiency was influenced by the concentrations of the salts and their Homeister series: Na3PO4 greater than Na2CO3 greater than Na2SO4 greater than NaH2PO4 greater than NaCl. These data are exposed to be useful for the development and design of the extraction process using ILs based on the ATPS. This proposed method also provided an effective route for the recovery of hydrophilic IL from aqueous solutions.
Compounds
# Formula Name
1 C8H15BF4N2 1-butyl-3-methylimidazolium tetrafluoroborate
2 Na3O4P trisodium phosphate
3 CNa2O3 sodium carbonate
4 H2NaO4P sodium dihydrogen phosphate
5 Na2O4S sodium sulfate
6 ClNa sodium chloride
7 H2O water
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 2
  • 7
  • 1
  • Mass fraction - 1 ; Liquid mixture 1
  • Mass fraction - 2; Liquid mixture 1
  • Temperature, K; Liquid mixture 1
  • Pressure, kPa; Liquid mixture 1
  • Liquid mixture 1
  • Liquid mixture 2
  • Titration method
  • 18
  • POMD
  • 3
  • 7
  • 1
  • Mass fraction - 3 ; Liquid mixture 1
  • Mass fraction - 1 ; Liquid mixture 2
  • Mass fraction - 3 ; Liquid mixture 2
  • Mass fraction - 1; Liquid mixture 1
  • Temperature, K; Liquid mixture 2
  • Pressure, kPa; Liquid mixture 2
  • Liquid mixture 1
  • Liquid mixture 2
  • Titration method
  • Titration method
  • Titration method
  • 3
  • POMD
  • 3
  • 7
  • 1
  • Mass fraction - 1 ; Liquid mixture 1
  • Mass fraction - 3; Liquid mixture 1
  • Temperature, K; Liquid mixture 1
  • Pressure, kPa; Liquid mixture 1
  • Liquid mixture 1
  • Liquid mixture 2
  • Titration method
  • 20
  • POMD
  • 3
  • 7
  • 1
  • Mass fraction - 1 ; Liquid mixture 1
  • Temperature, K; Liquid mixture 1
  • Mass fraction - 3; Liquid mixture 1
  • Pressure, kPa; Liquid mixture 1
  • Liquid mixture 1
  • Liquid mixture 2
  • Titration method
  • 40
  • POMD
  • 7
  • 5
  • 1
  • Mass fraction - 1 ; Liquid mixture 1
  • Mass fraction - 5; Liquid mixture 1
  • Temperature, K; Liquid mixture 1
  • Pressure, kPa; Liquid mixture 1
  • Liquid mixture 1
  • Liquid mixture 2
  • Titration method
  • 17
  • POMD
  • 4
  • 7
  • 1
  • Mass fraction - 4 ; Liquid mixture 1
  • Mass fraction - 1 ; Liquid mixture 2
  • Mass fraction - 4 ; Liquid mixture 2
  • Mass fraction - 1; Liquid mixture 1
  • Temperature, K; Liquid mixture 2
  • Pressure, kPa; Liquid mixture 2
  • Liquid mixture 1
  • Liquid mixture 2
  • Titration method
  • Titration method
  • Titration method
  • 3
  • POMD
  • 4
  • 7
  • 1
  • Mass fraction - 1 ; Liquid mixture 1
  • Mass fraction - 4; Liquid mixture 1
  • Temperature, K; Liquid mixture 1
  • Pressure, kPa; Liquid mixture 1
  • Liquid mixture 1
  • Liquid mixture 2
  • Titration method
  • 20
  • POMD
  • 4
  • 7
  • 1
  • Mass fraction - 1 ; Liquid mixture 1
  • Temperature, K; Liquid mixture 1
  • Mass fraction - 4; Liquid mixture 1
  • Pressure, kPa; Liquid mixture 1
  • Liquid mixture 1
  • Liquid mixture 2
  • Titration method
  • 33
  • POMD
  • 6
  • 7
  • 1
  • Mass fraction - 1 ; Liquid mixture 1
  • Mass fraction - 6; Liquid mixture 1
  • Temperature, K; Liquid mixture 1
  • Pressure, kPa; Liquid mixture 1
  • Liquid mixture 1
  • Liquid mixture 2
  • Titration method
  • 14