Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Vapor-Liquid Equilibria and Interfacial Tensions of the System Ethanol + 2-Methoxy-2-methylpropane

Mejia, A.[Andres], Segura, H.[Hugo], Cartes, M.[Marcela]
J. Chem. Eng. Data 2010, 55, 1, 428-434
ABSTRACT
Isobaric vapor-liquid equilibrium data have been measured for the binary system ethanol + 2-methoxy-2-methylpropane at (50, 75, and 94) kPa and over the temperature range (308 to 345) K. Equilibrium determinations were performed in a vapor-liquid equilibrium still with circulation of both phases. The dependence of interfacial tensions of this mixture on concentration was also determined at atmospheric pressure and 303.15 K, using the maximum bubble pressure technique. According to experimental results, the mixture exhibits positive deviation from ideal behavior, and azeotropic behavior was observed at (75 and 94) kPa. In addition, the determined interfacial tensions exhibit negative deviation from the linear behavior, and aneotropy is present. The vapor-liquid equilibrium data of the binary mixture satisfy the Fredenlund s consistency test and were well-correlated by the nonrandom two-liquid, Wilson, and UNIQUAC equations for all of the measured isobars. Interfacial tensions, in turn, were satisfactorily correlated using the Redlich-Kister equation.
Compounds
# Formula Name
1 C2H6O ethanol
2 C5H12O 2-methoxy-2-methylpropane
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:2
  • 1
  • POMD
  • 1
  • Surface tension liquid-gas, N/m ; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Air at 1 atmosphere
  • Maximal bubble pressure
  • 1
  • POMD
  • 1
  • Vapor or sublimation pressure, kPa ; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Gas
  • EBULLIO:UFactor:4
  • 16
  • POMD
  • 2
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 2
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:2
  • 1
  • POMD
  • 2
  • Surface tension liquid-gas, N/m ; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Air at 1 atmosphere
  • Maximal bubble pressure
  • 1
  • POMD
  • 2
  • Vapor or sublimation pressure, kPa ; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Gas
  • EBULLIO:UFactor:5
  • 3
  • POMD
  • 1
  • 2
  • Surface tension liquid-gas, N/m ; Liquid
  • Mole fraction - 1; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Air at 1 atmosphere
  • Maximal bubble pressure
  • 8
  • POMD
  • 1
  • 2
  • Azeotropic temperature, K ; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Gas
  • By X=Y
  • 2
  • POMD
  • 1
  • 2
  • Azeotropic composition: mole fraction - 1 ; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Gas
  • By X=Y
  • 2
  • POMD
  • 1
  • 2
  • Boiling temperature at pressure P, K ; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Gas
  • EBULLIO:UFactor:5
  • 63
  • POMD
  • 1
  • 2
  • Mole fraction - 1 ; Gas
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Gas
  • Liquid
  • Chromatography
  • 63