Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Apparent Molar Volumes and Electrical Conductance of Ionic Liquids [Cnmim]Br (n = 8, 10, 12) in Ethylene Glycol, N,N-Dimethylformamide, and Dimethylsulfoxide at 298.15 K

Wang, J.[Jianji], Zhang, S.[Shibiao], Wang, H.[Huiyong], Pei, Y.[Yuanchao]
J. Chem. Eng. Data 2009, 54, 12, 3252-3258
ABSTRACT
Solution densities and conductivities for solutions of [Cnmim]Br (n = 8, 10, 12) ionic liquids (ILs) in ethylene glycol, N,N-dimethylformamide, and dimethylsulfoxide have been determined at 298.15 K as a function of ionic liquid concentration. The apparent molar volumes, standard partial molar volumes, molar conductivities, and the limiting molar conductivities of the ILs have been derived from the experimental data. On the basis of the values of the standard partial molar volume and the limiting molar conductivity of the Br- anion available in the literature, the standard partial molar volumes and the limiting molar conductivities for the cations have also been reported in the three organic solvents. These data help to examine the effect of alkyl chain length of the cations and properties of the solvents. It was shown that the standard partial molar volumes of the ILs and their cations increased, but the limiting molar conductivities decreased linearly with the increase of the alkyl chain length. The fluidity of the solvents played an important role in the conductivity properties.
Compounds
# Formula Name
1 C2H6OS dimethyl sulfoxide
2 C2H6O2 1,2-ethanediol
3 C3H7NO dimethylformamide
4 C12H23BrN2 1-methyl-3-octylimidazolium bromide
5 C14H27BrN2 1-decyl-3-methylimidazolium bromide
6 C16H31BrN2 1-dodecyl-3-methylimidazolium bromide
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • 4
  • Molar conductivity, S*m2/mol ; Liquid
  • Amount concentration (molarity), mol/dm3 - 4; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Wayne-Kerr 6430B Auto Balance Bridge
  • 9
  • POMD
  • 1
  • 4
  • Mass density, kg/m3 ; Liquid
  • Molality, mol/kg - 4; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Vibrating tube method
  • 11
  • POMD
  • 1
  • 5
  • Molar conductivity, S*m2/mol ; Liquid
  • Amount concentration (molarity), mol/dm3 - 5; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Wayne-Kerr 6430B Auto Balance Bridge
  • 9
  • POMD
  • 1
  • 5
  • Mass density, kg/m3 ; Liquid
  • Molality, mol/kg - 5; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Vibrating tube method
  • 11
  • POMD
  • 1
  • 6
  • Molar conductivity, S*m2/mol ; Liquid
  • Amount concentration (molarity), mol/dm3 - 6; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Wayne-Kerr 6430B Auto Balance Bridge
  • 9
  • POMD
  • 1
  • 6
  • Mass density, kg/m3 ; Liquid
  • Molality, mol/kg - 6; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Vibrating tube method
  • 11
  • POMD
  • 2
  • 4
  • Molar conductivity, S*m2/mol ; Liquid
  • Amount concentration (molarity), mol/dm3 - 4; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Wayne-Kerr 6430B Auto Balance Bridge
  • 10
  • POMD
  • 2
  • 4
  • Mass density, kg/m3 ; Liquid
  • Molality, mol/kg - 4; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Vibrating tube method
  • 10
  • POMD
  • 2
  • 5
  • Molar conductivity, S*m2/mol ; Liquid
  • Amount concentration (molarity), mol/dm3 - 5; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Wayne-Kerr 6430B Auto Balance Bridge
  • 10
  • POMD
  • 2
  • 5
  • Mass density, kg/m3 ; Liquid
  • Molality, mol/kg - 5; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Vibrating tube method
  • 10
  • POMD
  • 2
  • 6
  • Molar conductivity, S*m2/mol ; Liquid
  • Amount concentration (molarity), mol/dm3 - 6; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Wayne-Kerr 6430B Auto Balance Bridge
  • 10
  • POMD
  • 2
  • 6
  • Mass density, kg/m3 ; Liquid
  • Molality, mol/kg - 6; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Vibrating tube method
  • 9
  • POMD
  • 3
  • 4
  • Molar conductivity, S*m2/mol ; Liquid
  • Amount concentration (molarity), mol/dm3 - 4; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Wayne-Kerr 6430B Auto Balance Bridge
  • 10
  • POMD
  • 3
  • 4
  • Mass density, kg/m3 ; Liquid
  • Molality, mol/kg - 4; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Vibrating tube method
  • 11
  • POMD
  • 3
  • 5
  • Molar conductivity, S*m2/mol ; Liquid
  • Amount concentration (molarity), mol/dm3 - 5; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Wayne-Kerr 6430B Auto Balance Bridge
  • 10
  • POMD
  • 3
  • 5
  • Mass density, kg/m3 ; Liquid
  • Molality, mol/kg - 5; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Vibrating tube method
  • 11
  • POMD
  • 3
  • 6
  • Molar conductivity, S*m2/mol ; Liquid
  • Amount concentration (molarity), mol/dm3 - 6; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Wayne-Kerr 6430B Auto Balance Bridge
  • 10
  • POMD
  • 3
  • 6
  • Mass density, kg/m3 ; Liquid
  • Molality, mol/kg - 6; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Vibrating tube method
  • 11