Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Isothermal Vapor-Liquid Equilibrium at 333.15 K and Excess Molar Volumes, Refractive Indices, and Excess Molar Enthalpies at 303.15 K for the Binary and Ternary Mixtures of Di-isopropyl Ether, Ethanol, and 2,2,4-Trimethylpentane

Kim, H.-D.[Hyeon-Deok], Hwang, I.-C.[In-Chan], Park, S.-J.[So-Jin]
J. Chem. Eng. Data 2009, 54, 11, 3051-3058
ABSTRACT
Isothermal vapor-liquid equilibrium (VLE) data at 333.15 K are measured for the binary systems {di-isopropyl ether (DIPE) + ethanol} and {DIPE + 2,2,4-trimethylpentane} and for the ternary system {DIPE + ethanol + 2,2,4-trimethylpentane} by using headspace gas chromatography. The experimental VLE data were correlated with the GE model: Margules, van Laar, Wilson, nonrandom two-liquid, and UNIQUAC equations. The excess molar volume and deviations in molar refractivity data are reported for the binary systems {DIPE + ethanol}, {DIPE + 2,2,4-trimethylpentane}, and {ethanol + 2,2,4-trimethylpentane} at 303.15 K. In addition, excess molar enthalpies for two binaries, {DIPE + ethanol} and {DIPE + 2,2,4-trimethylpentane}, at 303.15 K are also reported. These data were correlated with the Redlich-Kister equation. The excess molar volume and deviations in molar refractivity data are also reported for the ternary system {DIPE + ethanol + 2,2,4-trimethylpentane} at 303.15 K. The ternary data were correlated with the Cibulka equation. Also, the isocline of excess molar enthalpies for the same ternary system at 303.15 K was calculated using the Radojkovi equation.
Compounds
# Formula Name
1 C6H14O diisopropyl ether
2 C2H6O ethanol
3 C8H18 2,2,4-trimethylpentane
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 2
  • 1
  • Excess molar enthalpy (molar enthalpy of mixing), kJ/mol ; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Flow calorimetry
  • 19
  • POMD
  • 2
  • 1
  • Refractive index (Na D-line) ; Liquid
  • Mole fraction - 1; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 13
  • POMD
  • 2
  • 1
  • Mass density, kg/m3 ; Liquid
  • Mole fraction - 1; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:2
  • 13
  • POMD
  • 2
  • 1
  • Mole fraction - 1 ; Gas
  • Mole fraction - 1; Liquid
  • Temperature, K; Gas
  • Gas
  • Liquid
  • CHROM:UFactor:4
  • 22
  • POMD
  • 1
  • 3
  • Excess molar enthalpy (molar enthalpy of mixing), kJ/mol ; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Flow calorimetry
  • 19
  • POMD
  • 1
  • 3
  • Refractive index (Na D-line) ; Liquid
  • Mole fraction - 1; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 13
  • POMD
  • 1
  • 3
  • Mass density, kg/m3 ; Liquid
  • Mole fraction - 1; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:2
  • 13
  • POMD
  • 1
  • 3
  • Mole fraction - 1 ; Gas
  • Mole fraction - 1; Liquid
  • Temperature, K; Gas
  • Gas
  • Liquid
  • CHROM:UFactor:4
  • 22
  • POMD
  • 2
  • 3
  • Refractive index (Na D-line) ; Liquid
  • Mole fraction - 2; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 13
  • POMD
  • 2
  • 3
  • Mass density, kg/m3 ; Liquid
  • Mole fraction - 2; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:2
  • 13
  • POMD
  • 2
  • 1
  • 3
  • Refractive index (Na D-line) ; Liquid
  • Mole fraction - 1; Liquid
  • Mole fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 66
  • POMD
  • 2
  • 1
  • 3
  • Mass density, kg/m3 ; Liquid
  • Mole fraction - 1; Liquid
  • Mole fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • VIBTUB:UFactor:2
  • 66
  • POMD
  • 2
  • 1
  • 3
  • Mole fraction - 2 ; Gas
  • Mole fraction - 1; Liquid
  • Mole fraction - 2; Liquid
  • Temperature, K; Gas
  • Gas
  • Liquid
  • Chromatography
  • 50
  • POMD
  • 2
  • 1
  • 3
  • Mole fraction - 1 ; Gas
  • Mole fraction - 1; Liquid
  • Mole fraction - 2; Liquid
  • Temperature, K; Gas
  • Gas
  • Liquid
  • Chromatography
  • 50