Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Thermophysical Properties of Aqueous Piperazine and Aqueous (N-Methyldiethanolamine + Piperazine) Solutions at Temperatures (298.15 to 338.15) K

Muhammad, A.[Ayyaz], Mutalib, M. I. A.[Mohamed I. Abdul], Murugesan, T.[Thanabalan], Shafeeq, A.[Amir]
J. Chem. Eng. Data 2009, 54, 8, 2317-2321
ABSTRACT
In the present work, thermophysical properties such as density (F), dynamic viscosity (c), refractive index (nD), and surface tension (o) of aqueous piperazine (PZ) solutions with mass fractions (100w ) 1.74, 5.16, 10.35) have been measured from temperatures (298.15 to 338.15) K. All of these properties have also been measured for the aqueous blends of N-methyldiethanolamine (MDEA) and piperazine (PZ) with mass fractions {100(w1/w2) ) 32.28/1.74, 32.28/5.16, 32.28/10.35, 48.80/1.74, 48.80/5.16, 48.80/10.35)} for the entire temperature range. The limit of PZ solubility in water was measured by the addition of a known quantity of anhydrous PZ (solid crystals) in 20 mL of distilled water at temperatures (278 to 343) K with a regular interval of 5 K. The experimental values of the studied physical properties have been compared with the literature and also correlated as a function of temperature. The coefficients of thermal expansion (Rp) values have been calculated from their experimental density data using an empirical correlation. A thermogravimetric analyzer (TGA) has been used to explore the thermal stability of the studied solvent systems at a heating rate of 10 deg C* min-1.
Compounds
# Formula Name
1 C5H13NO2 N-methyldiethanolamine
2 C4H10N2 piperazine
3 H2O water
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 2
  • 3
  • Mole fraction - 2 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 2
  • Titration method
  • 7
  • POMD
  • 2
  • 3
  • Mole fraction - 2 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal of intercomponent compound 1
  • Titration method
  • 5
  • POMD
  • 2
  • 3
  • Surface tension liquid-gas, N/m ; Liquid
  • Temperature, K; Liquid
  • Mass fraction - 2; Liquid
  • Liquid
  • Air at 1 atmosphere
  • Ring tensiometer
  • 15
  • POMD
  • 2
  • 3
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Mass fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • CAPTUB:UFactor:8
  • 15
  • POMD
  • 2
  • 3
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Mass fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • ABBE:UFactor:4
  • 15
  • POMD
  • 2
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Mass fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:16
  • 27
  • POMD
  • 1
  • 2
  • 3
  • Surface tension liquid-gas, N/m ; Liquid
  • Temperature, K; Liquid
  • Mass fraction - 1; Liquid
  • Mass fraction - 2; Liquid
  • Liquid
  • Air at 1 atmosphere
  • Ring tensiometer
  • 30
  • POMD
  • 1
  • 2
  • 3
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Mass fraction - 1; Liquid
  • Mass fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • CAPTUB:UFactor:8
  • 30
  • POMD
  • 1
  • 2
  • 3
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Mass fraction - 1; Liquid
  • Mass fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • ABBE:UFactor:4
  • 30
  • POMD
  • 1
  • 2
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Mass fraction - 1; Liquid
  • Mass fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:16
  • 54