Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Viscosity and Density of Carbon Dioxide + 2,6,10,15,19,23-Hexamethyltetracosane (Squalane)

Ciotta, F.[Fausto], Maitland, G.[Geoffrey], Smietana, M.[Matthieu], Trusler, J. P. M.[J. P. Martin], Vesovic, V.[Velisa]
J. Chem. Eng. Data 2009, 54, 9, 2436-2443
ABSTRACT
The viscosity and density of mixtures of carbon dioxide and 2,6,10,15,19,23-hexamethyltetracosane (squalane) are reported. The measurements were carried out using a vibrating wire instrument over a range of temperatures from (303.15 to 448.15) K and at pressures ranging from approximately the minimum miscibility pressure at a given composition to 170 MPa. Pure squalane and three different mixtures, with mole fractions of CO2 of 0.423, 0.604, and 0.788, were investigated. The estimated expanded relative uncertainties of the measurements were ( 2 % for viscosity and ( 0.2 % for density with a coverage factor of 2. The data for each composition were correlated by simple expressions with an absolute average relative deviation less than 2 % for viscosity and less than 0.2 % for density. The results show that the addition of CO2 to squalane at a given pressure and temperature reduces greatly the viscosity and increases slightly the density. A hardsphere model, adjusted to fit the viscosity data of the pure substances but containing no adjustable binary parameters, was tested against the experimental data. Relative deviations bounded by approximately ( 60 % were found.
Compounds
# Formula Name
1 C30H62 2,6,10,15,19,23-hexamethyltetracosane
2 CO2 carbon dioxide
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating wire viscometry
  • 32
  • POMD
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • vibrating-wire apparatus
  • 32
  • POMD
  • 1
  • 2
  • Viscosity, Pa*s ; Liquid
  • Mole fraction - 2; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating wire viscometry
  • 116
  • POMD
  • 1
  • 2
  • Mass density, kg/m3 ; Liquid
  • Mole fraction - 2; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • vibrating-wire apparatus
  • 116