Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Solidification Behavior of the Benzamide + O-Chlorobenzoic Acid Eutectic System

Singh, N. B.[Nakshatra B.], Agrawal, T.[Tanvi], Gupta, P.[Preeti], Das, S. S.[Shiva Saran]
J. Chem. Eng. Data 2009, 54, 5, 1529-1536
ABSTRACT
The phase diagram of the benzamide + o-chlorobenzoic acid system has been studied by the thaw-melt method, and results show the formation of a simple eutectic mixture. Values of enthalpies of fusion of pure components and the eutectic mixture were determined from DSC studies. Excess Gibb s energy (GE), excess enthalpy (HE), and excess entropy (SE) of mixing of pre-, post-, and the eutectic mixture were also calculated using activity coefficient data. Linear velocities of solidification of pure components and the eutectic mixture were determined at different undercooling rates. The values of the excess thermodynamic functions, linear velocity of crystallization, and ab initio calculations indicate the nonideal nature of the eutectic mixture in the melt. The anisotropic and instantaneous crystallizations of benzamide, o-chlorobenzoic acid, and the eutectic mixture were studied. The flexural strengths of the pure components and the eutectic mixture were also measured.
Compounds
# Formula Name
1 C7H7NO benzamide
2 C7H5ClO2 2-chlorobenzoic acid
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Molar enthalpy of transition or fusion, kJ/mol ; Crystal
  • Crystal
  • Liquid
  • Air at 1 atmosphere
  • DSC
  • 1
  • POMD
  • 1
  • Normal melting temperature, K ; Crystal
  • Crystal
  • Liquid
  • Air at 1 atmosphere
  • VISOBS
  • 1
  • POMD
  • 2
  • Molar enthalpy of transition or fusion, kJ/mol ; Crystal
  • Crystal
  • Liquid
  • Gas
  • DSC
  • 1
  • POMD
  • 2
  • Normal melting temperature, K ; Crystal
  • Crystal
  • Liquid
  • Air at 1 atmosphere
  • VISOBS
  • 1
  • POMD
  • 1
  • 2
  • Eutectic temperature, K ; Crystal - 1
  • Crystal - 1
  • Crystal - 2
  • Liquid
  • Air at 1 atmosphere
  • DTA::::
  • 1
  • POMD
  • 1
  • 2
  • Solid-liquid equilibrium temperature, K ; Liquid
  • Mole fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 1
  • VISOBS:UFactor:16
  • 7
  • POMD
  • 1
  • 2
  • Solid-liquid equilibrium temperature, K ; Liquid
  • Mole fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 2
  • VISOBS:UFactor:16
  • 6