Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Solubility of Deflazacort in Binary Solvent Mixtures

Wang, P.[Peng], Gong, J.[Junbo], Wang, B.[Bochao], Zhang, M.[Meijing], Wang, J.[Jingkang]
J. Chem. Eng. Data 2009, 54, 1, 162-164
ABSTRACT
Experimental solubility data were measured for deflazacort dissolved in binary n-hexane + acetone, n-hexane + ethyl acetate, n-hexane + ethanol, and n-hexane + 2-propanol solvent mixtures at 303.15 K and atmospheric pressure by laser monitoring technique. Results of these measurements were used to test the predictive ability of the combined nearly ideal binary solvent (NIBS)/Redlich-Kister model. Computation showed that the model fit the data well.
Compounds
# Formula Name
1 C25H31NO6 deflazacort
2 C6H14 hexane
3 C3H6O acetone
4 C4H8O2 ethyl acetate
5 C2H6O ethanol
6 C3H8O propan-2-ol
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 3
  • 2
  • 1
  • Mole fraction - 1 ; Liquid
  • Solvent: Mole fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Crystal - 1
  • Laser intensity, when the intensity did not reach 90% of the maximum solute believed to not be completely dissolved
  • 10
  • POMD
  • 2
  • 4
  • 1
  • Mole fraction - 1 ; Liquid
  • Solvent: Mole fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Crystal - 1
  • Laser intensity, when the intensity did not reach 90% of the maximum solute believed to not be completely dissolved
  • 10
  • POMD
  • 5
  • 2
  • 1
  • Mole fraction - 1 ; Liquid
  • Solvent: Mole fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Crystal - 1
  • Laser intensity, when the intensity did not reach 90% of the maximum solute believed to not be completely dissolved
  • 15
  • POMD
  • 6
  • 2
  • 1
  • Mole fraction - 1 ; Liquid
  • Solvent: Mole fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Crystal - 1
  • Laser intensity, when the intensity did not reach 90% of the maximum solute believed to not be completely dissolved
  • 12