Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Densities, Excess Molar Volumes, Viscosity, and Refractive Indices of Binary and Ternary Liquid Mixtures of Methanol (1) + Ethanol (2) + 1,2-Propanediol (3) at P = 81.5 kPa

Zarei, H. A.[Hossein A.], Mirhidari, N.[Narjes], Zangeneh, Z.[Zinab]
J. Chem. Eng. Data 2009, 54, 3, 847-854
ABSTRACT
Excess molar volume, VmE, and excess partial molar volume, ViE, of the ternary mixtures of methanol (1) + ethanol (2) + 1,2-propanediol (3) and of two binaries of methanol (1) + 1,2-propanediol (3) and ethanol (2) + 1,2-propanediol (3) have been investigated from the density, ?, measurements over the entire range of compositions at temperatures (298.15, 303.15, and 308.15) K and at P = 81.5 kPa. The limiting values of the excess partial molar volumes at infinite dilution, ViE,8, and thermal expansion coefficients, a, of the pure components are also evaluated. The dynamic viscosity, ?, of the ternary and the relevant binary mixtures and the refractive indices, nD, of the binary mixtures at temperature 303.15 K were measured. The measured systems exhibited negative values of VmE and become more negative with increasing temperatures. The excess molar volumes, dynamic viscosity, and refractive index deviations were correlated with the Redlich-Kister and the Cibulka equations for the binary and ternary system, respectively. The excess molar volumes, VmE, of the binary mixtures were compared with values from the literature in the region of overlap.
Compounds
# Formula Name
1 C2H6O ethanol
2 C3H8O2 1,2-propanediol
3 CH4O methanol
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 1
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Capillary tube (Ostwald; Ubbelohde) method
  • 1
  • POMD
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB::UFactor:3
  • 3
  • POMD
  • 2
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 2
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Capillary tube (Ostwald; Ubbelohde) method
  • 1
  • POMD
  • 2
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:3
  • 3
  • POMD
  • 3
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 3
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Capillary tube (Ostwald; Ubbelohde) method
  • 1
  • POMD
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB::UFactor:3
  • 3
  • POMD
  • 2
  • 3
  • Viscosity, Pa*s ; Liquid
  • Mole fraction - 3; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Capillary tube (Ostwald; Ubbelohde) method
  • 12
  • POMD
  • 2
  • 3
  • Refractive index (Na D-line) ; Liquid
  • Mole fraction - 3; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • ABBE:UFactor:2
  • 12
  • POMD
  • 2
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 3; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:3
  • 42
  • POMD
  • 2
  • 1
  • Viscosity, Pa*s ; Liquid
  • Mole fraction - 1; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Capillary tube (Ostwald; Ubbelohde) method
  • 12
  • POMD
  • 2
  • 1
  • Refractive index (Na D-line) ; Liquid
  • Mole fraction - 1; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • ABBE:UFactor:2
  • 12
  • POMD
  • 2
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:3
  • 39
  • POMD
  • 1
  • 3
  • Viscosity, Pa*s ; Liquid
  • Mole fraction - 3; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Capillary tube (Ostwald; Ubbelohde) method
  • 12
  • POMD
  • 1
  • 3
  • Refractive index (Na D-line) ; Liquid
  • Mole fraction - 3; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • ABBE:UFactor:2
  • 12
  • POMD
  • 2
  • 1
  • 3
  • Viscosity, Pa*s ; Liquid
  • Mole fraction - 3; Liquid
  • Mole fraction - 1; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Capillary tube (Ostwald; Ubbelohde) method
  • 36
  • POMD
  • 2
  • 1
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 3; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:3
  • 108