Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

KCl-Induced Phase Separation of 1,4-Dioxane + Water Mixtures Studied by Electrical Conductivity and Refractive Index

Kouissi, T., Bouanz, M., Ouerfelli, N.
J. Chem. Eng. Data 2009, 54, 2, 566-573
ABSTRACT
Salt-induced phase separation of 1,4-dioxane (D) + water (W) with KCl has been investigated by measuring the electrical conductivity ( E) and the refractive index (n) along the coexisting curve in the vicinity and far from the lower critical solution temperature (LCST) using a conductometer and a refractometer. By visual method, the lower critical temperature (Tc) was determined to be (311.032 ( 0.015) K with the mole fraction of dioxane on a salt-free basis: x D ) nD/(nD + nW) ) 0.295 ( 0.002. The conductivity and refractive index were carried out in the range of 0.010 K less than (T - Tc) less than 17.500 K. Critical values were fitted and compared with those predicted by models proposed in the literature. The electrical conductivity and refractive index coexistence curve data were analyzed to determine the critical exponent ( ) associated with the coexistence curve. The results show that those ( E and n) constitute good order parameters as valid as the volume fraction. In the neighborhood of the LCST (T/Tc - 1 less than 3 E 10-2), the critical exponent obtained by the two techniques agrees with the scaling law prediction. The KCl salt at the saturation facilitates the formation of the molecular correlations, and the phase separation takes place in the electrolyte.
Compounds
# Formula Name
1 C4H8O2 1,4-dioxane
2 H2O water
3 ClK potassium chloride
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • 3
  • 2
  • Electrical conductivity, S/m ; Liquid mixture 1
  • Temperature, K; Liquid mixture 1
  • Pressure, kPa; Liquid mixture 1
  • Liquid mixture 1
  • Liquid mixture 2
  • Crystal - 1
  • commercial (phywe type) conductometer
  • 61
  • POMD
  • 1
  • 3
  • 2
  • Electrical conductivity, S/m ; Liquid mixture 2
  • Temperature, K; Liquid mixture 2
  • Pressure, kPa; Liquid mixture 2
  • Liquid mixture 2
  • Liquid mixture 1
  • Crystal - 1
  • commercial (phywe type) conductometer
  • 61
  • POMD
  • 1
  • 3
  • 2
  • Electrical conductivity, S/m ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 3
  • commercial (phywe type) conductometer
  • 14
  • POMD
  • 1
  • 3
  • 2
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Mole fraction - 1; Liquid
  • Liquid
  • Crystal - 3
  • Standard Abbe refractometry
  • 22
  • POMD
  • 1
  • 3
  • 2
  • Refractive index (Na D-line) ; Liquid mixture 1
  • Temperature, K; Liquid mixture 1
  • Pressure, kPa; Liquid mixture 1
  • Liquid mixture 1
  • Liquid mixture 2
  • Crystal - 3
  • Standard Abbe refractometry
  • 86
  • POMD
  • 1
  • 3
  • 2
  • Refractive index (Na D-line) ; Liquid mixture 2
  • Temperature, K; Liquid mixture 2
  • Pressure, kPa; Liquid mixture 2
  • Liquid mixture 2
  • Liquid mixture 1
  • Crystal - 3
  • Standard Abbe refractometry
  • 86