Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Gas-Liquid Equilibrium Data for a Mixture Gas of Sulfur Dioxide + Nitrogen with Ethylene Glycol Aqueous Solutions at 298.15 K and 123.15 kPa

Zhang, J.[Jianbin], Zhang, P.[Pengyan], Han, F.[Fang], Chen, G.[Guohua], Deng, R.[Ronghua], Wei, X.-H.[Xiong-Hui]
J. Chem. Eng. Data 2008, 53, 10, 2372-2374
ABSTRACT
Isothermal gas-liquid equilibrium (GLE) data have been measured for the system SO2 + N2 + ethylene glycol (EG) + water at 298.15 K and 123.15 kPa and SO2 partial pressures in the range of (0 to 120) Pa. Measurements were carried out by a saturation method using a glass absorption apparatus, which was controlled at constant temperature by a thermostatic circulation bath with a Beckmann thermometer. The GLE data were obtained with relative uncertainties within ( 3.5 % for SO2 concentration in the gas phase and ( 0.6 % for SO2 concentration in the liquid phase. The measurement showed that the addition of water to EG enhanced the solubility of SO2 compared with pure EG and that the 80 % volume fraction of EG in ethylene glycol + water solution is a more reasonable composition used as the desulfurization solution. The results of this work can be used to provide important GLE data for the design and operation of the absorption and desorption process in flue gas desulfurization (FGD) with potential industrial application of EG aqueous solutions.
Compounds
# Formula Name
1 O2S sulfur dioxide
2 N2 nitrogen
3 C2H6O2 1,2-ethanediol
4 H2O water
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 3
  • Surface tension liquid-gas, N/m ; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Gas
  • DROPV::UFactor:4
  • 4
  • POMD
  • 3
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Gas
  • CAPTUB::UFactor:8
  • 4
  • POMD
  • 3
  • 4
  • Surface tension liquid-gas, N/m ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 3; Liquid
  • Liquid
  • Gas
  • DROPV:UFactor:4
  • 52
  • POMD
  • 3
  • 4
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 3; Liquid
  • Liquid
  • Gas
  • CAPTUB:UFactor:8
  • 52
  • POMD
  • 1
  • 2
  • 4
  • Mass concentration, kg/m3 - 1 ; Liquid
  • Mole fraction - 1; Gas
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Gas
  • Chromatography
  • 10
  • POMD
  • 3
  • 1
  • 2
  • Mass concentration, kg/m3 - 1 ; Liquid
  • Mole fraction - 1; Gas
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Gas
  • Chromatography
  • 17