Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Density and Viscosity of Anhydrous Mixtures of Dimethylsulfoxide with Acetonitrile in the Range (298.15 to 318.15) K

Grande, M. d. C.[Maria del Carmen], Garcia, M.[Mariano], Marschoff, C. M.[Carlos M.]
J. Chem. Eng. Data 2009, 54, 2, 652-658
ABSTRACT
The density and viscosity of dimethylsulfoxide (DMSO) + acetonitrile (AN) mixtures were determined over the whole composition range at T ) (298.15, 303.15, 308.15, 313.15, and 318.15) K. Since experimental density values showed to be very sensitive to water content, the water-free values of these magnitudes were determined by extrapolation from data obtained on ternary mixtures with small, well-determined, amounts of water and constant xDMSO/xAN. Excess volumes of the anhydrous mixtures show positive values with a quite symmetrical behavior. Viscosity data were satisfactorily fitted with a sixth degree polynomial. Excess viscosities as well as activation parameters for viscous flow in the mixtures were calculated.
Compounds
# Formula Name
1 C2H6OS dimethyl sulfoxide
2 C2H3N acetonitrile
3 H2O water
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • CAPTUB:UFactor:2
  • 5
  • POMD
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:2
  • 5
  • POMD
  • 2
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • CAPTUB:UFactor:2
  • 5
  • POMD
  • 2
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:2
  • 5
  • POMD
  • 1
  • 2
  • Viscosity, Pa*s ; Liquid
  • Mole fraction - 2; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • CAPTUB:UFactor:2
  • 120
  • POMD
  • 1
  • 2
  • Mass density, kg/m3 ; Liquid
  • Mole fraction - 2; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:2
  • 120
  • POMD
  • 1
  • 2
  • 3
  • Mass density, kg/m3 ; Liquid
  • Mole fraction - 1; Liquid
  • Mole fraction - 2; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:2
  • 550