ABSTRACT

Density and viscosity for the methanol + methyl methacrylate (MMA) binary system over the whole concentration range in the temperature range from (383.15 to 333.15) K were measured. From the all experimental data, the excess molar volumes VE and viscosity deviations ac were calculated. Excess molar volumes and viscosity deviations were correlated by the Redlich-Kister type equations. Optimally fitted parameters are presented, and the correlation results are in satisfactory agreement with the experimental data.

Compounds

#	Formula	Name
1	CH4O	methanol
2	C5H8O2	methyl methacrylate

Datasets

The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type	Compound-#	Property	Variable	Constraint	Phase	Method	#Points
POMD	1	Viscosity, Pa*s ; Liquid	Temperature, K; Liquid	Pressure, kPa; Liquid	Liquid	Capillary tube (Ostwald; Ubbelohde) method	11
POMD	1	Mass density, kg/m3 ; Liquid	Temperature, K; Liquid	Pressure, kPa; Liquid	Liquid	VIBTUB:UFactor:2	11
POMD	2	Viscosity, Pa*s ; Liquid	Temperature, K; Liquid	Pressure, kPa; Liquid	Liquid	Capillary tube (Ostwald; Ubbelohde) method	11
POMD	2	Mass density, kg/m3 ; Liquid	Temperature, K; Liquid	Pressure, kPa; Liquid	Liquid	VIBTUB:UFactor:6	11
POMD	1 2	Viscosity, Pa*s ; Liquid	Temperature, K; Liquid Mole fraction - 1; Liquid	Pressure, kPa; Liquid	Liquid	Capillary tube (Ostwald; Ubbelohde) method	99
POMD	1 2	Mass density, kg/m3 ; Liquid	Temperature, K; Liquid Mole fraction - 1; Liquid	Pressure, kPa; Liquid	Liquid	VIBTUB:UFactor:4	99

Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Excess Molar Volume and Viscosity Deviation for the Methanol + Methyl Methacrylate Binary System at T) (283.15 to 333.15) K

Fan, W.[Wei], Zhou, Q.[Qing], Zhang, S.[Suojiang], Yan, R.[Ruiyi]

ABSTRACT