Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Vapor Pressures and Liquid Densities of Ammonium Chloride + Ammonia Mixtures

Tomida, D.[Daisuke], Suzuki, K.[Kousuke], Katou, Y.[Yuuichi], Yokoyama, C.[Chiaki]
J. Chem. Eng. Data 2008, 53, 7, 1583-1586
ABSTRACT
Vapor pressures and liquid densities for ammonium chloride (NH4Cl) + ammonia (NH3) mixtures were measured over a wide range of temperatures and concentrations. Vapor pressures of the NH4Cl + NH3 mixtures were measured at temperatures ranging from (303.12 to 373.16) K and concentrations ranging up to 50.74 wt % of NH4Cl. Vapor pressure was measured with a pressure transducer. The experimental values were correlated with Antoine s equation. Liquid densities of the NH4Cl + NH3 mixtures were measured at temperatures ranging from (303.15 to 373.15) K, pressure ranging from (10.0 to 30.0) MPa, and concentrations ranging up to 50.68 wt % of NH4Cl. Liquid densities were measured with a piezometer. The experimental values were correlated with a Tait-form equation.
Compounds
# Formula Name
1 ClH4N ammonium chloride (NH4Cl)
2 H3N ammonia
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 2
  • Vapor or sublimation pressure, kPa ; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Gas
  • Closed cell (Static) method
  • 8
  • POMD
  • 2
  • 1
  • Vapor or sublimation pressure, kPa ; Liquid
  • Temperature, K; Liquid
  • Mass fraction - 1; Liquid
  • Liquid
  • Gas
  • Closed cell (Static) method
  • 40
  • POMD
  • 2
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Mass fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:16
  • 200