Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Setup and Validation of a PGT Measuring Device. Volumetric Behavior of the Mixture 1,8-Cineole + Ethanol

Lasarte, J. M.[Jose M.], Martin, L.[Luis], Langa, E.[Elisa], Urieta, J. S.[Jose S.], Mainar, A. M.[Ana M.]
J. Chem. Eng. Data 2008, 53, 6, 1393-1400
ABSTRACT
A measuring device, based on the vibrating tube principle, for measuring PFT data is described. The device was checked against the recommended literature values of the 1-hexanol + n-hexane binary system within the temperature and pressure ranges (278.15 to 313.15) K and (0.1 to 20) MPa. The relative deviations between experimental and bibliographic densities are lower than 0.2 %. After the validation, the original mixture 1,8-cineole + ethanol was studied in the ranges (283.15 to 313.15) K and (0.1 to 20) MPa. The isothermal compressibility, the isobaric thermal expansion, and the excess molar volume were derived from the experimental density data, revealing that a volume contraction occurs for this binary system. Four different equations of state, Peng Robinson, Sako-Wu-Prausnitz, Statistical Associating Fluid Theory (SAFT), and Perturbed-Chain Statistical Associating Fluid Theory (PC-SAFT), were applied to predict the volumetric behavior of the ethanolic mixture. The best predictions were achieved with the PC-SAFT equation of state.
Compounds
# Formula Name
1 C6H14 hexane
2 C6H14O hexan-1-ol
3 C2H6O ethanol
4 C10H18O 1,3,3-trimethyl-2-oxabicyclo[2.2.2]octane
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:6
  • 40
  • POMD
  • 2
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:6
  • 40
  • POMD
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:4
  • 15
  • POMD
  • 4
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:4
  • 15
  • POMD
  • 3
  • 4
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Mole fraction - 4; Liquid
  • Liquid
  • VIBTUB:UFactor:4
  • 165
  • POMD
  • 1
  • 2
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Mole fraction - 2; Liquid
  • Liquid
  • VIBTUB:UFactor:6
  • 440