Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Viscosity of the Tributyl Phosphate + Methyl Isobutyl Ketone + Phosphoric Acid System

Huang, M.[Meiying], Zhong, B.[Benhe], Li, J.[Jun]
J. Chem. Eng. Data 2008, 53, 9, 2029-2032
ABSTRACT
In this paper, kinetic viscosities of the phosphoric acid + tributyl phosphate + methyl isobutyl ketone, and + aviation kerosene systems with the content of P2O5 in the range of (0 to 17) % and temperature from (10 to 50) deg C were presented. After data processing, kinetic viscosities were found well-correlated with temperature and concentration of P2O5, which can be demonstrated by linear regression equations. According to those equations, kinetic viscosities of the phosphoric acid + tributyl phosphate + methyl isobutyl ketone were compared with those of phosphoric acid + tributyl phosphate + aviation kerosene systems. The results showed that the dilution effect of methyl isobutyl ketone was better than that of aviation kerosene under the same temperature and concentration of P2O5. In addition, the concentration of P2O5 in the tributyl phosphate + methyl isobutyl ketone system can be higher than that in the tributyl phosphate + aviation kerosene system without any three-phase situation. So, there are many advantages for purifying wet-process phosphoric acid by solvent extraction with tributyl phosphate + methyl isobutyl ketone.
Compounds
# Formula Name
1 C12H27O4P tributyl phosphate
2 C6H12O 4-methylpentan-2-one
3 H3O4P phosphoric acid
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • CAPTUB:UFactor:8
  • 1
  • POMD
  • 2
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • CAPTUB:UFactor:8
  • 1
  • POMD
  • 2
  • 1
  • Kinematic viscosity, m2/s ; Liquid
  • Temperature, K; Liquid
  • Volume ratio of solute to solvent - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • CAPTUB:UFactor:8
  • 15
  • POMD
  • 2
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Volume ratio of solute to solvent - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Pycnometric method
  • 15
  • POMD
  • 2
  • 1
  • 3
  • Kinematic viscosity, m2/s ; Liquid
  • Mass fraction - 3; Liquid
  • Temperature, K; Liquid
  • Solvent: Volume ratio of component to other component of binary solvent - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • CAPTUB:UFactor:8
  • 105
  • POMD
  • 2
  • 1
  • 3
  • Mass density, kg/m3 ; Liquid
  • Mass fraction - 3; Liquid
  • Temperature, K; Liquid
  • Solvent: Volume ratio of component to other component of binary solvent - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Pycnometric method
  • 105