Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Volumetric Properties and Viscosities of Binary Mixtures of N,N-Dimethylformamide with Methanol and Ethanol in the Temperature Range (293.15 to 333.15) K

Yang, C.[Changsheng], Sun, Y.[Yue], He, Y.[Yifu], Ma, P.[Peisheng]
J. Chem. Eng. Data 2008, 53, 1, 293-297
ABSTRACT
Densities and viscosities of the binary mixtures of methanol + DMF and ethanol + DMF have been measured over several temperatures at atmospheric pressure. The measurements were carried out over the whole range of compositions, using a vibrating-tube density meter and an Ubbelohde viscometer. The densities are used to calculate excess molar volumes for each of the systems. The experimental values of excess molar volumes have been compared with those reported by other authors available in the literature. The Redlich Kister equation was fitted to excess molar volumes, VE, and viscosities, c.
Compounds
# Formula Name
1 CH4O methanol
2 C2H6O ethanol
3 C3H7NO dimethylformamide
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • CAPTUB::UFactor:2
  • 5
  • POMD
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB::UFactor:4
  • 5
  • POMD
  • 2
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • CAPTUB::UFactor:2
  • 6
  • POMD
  • 2
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB::UFactor:4
  • 6
  • POMD
  • 3
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • CAPTUB:UFactor:2
  • 6
  • POMD
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:4
  • 6
  • POMD
  • 1
  • 3
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • CAPTUB:UFactor:2
  • 55
  • POMD
  • 1
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:4
  • 55
  • POMD
  • 2
  • 3
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • CAPTUB:UFactor:2
  • 66
  • POMD
  • 2
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:4
  • 66