Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Density, Viscosity, Speed of Sound, and Electrolytic Conductivity for the Ionic Liquid 1-Hexyl-3-methylimidazolium Bis(trifluoromethylsulfonyl)imide and Its Mixtures with Water

Widegren, J. A.[Jason A.], Magee, J. W.[Joseph W.]
J. Chem. Eng. Data 2007, 52, 6, 2331-2338
ABSTRACT
Thermophysical properties were measured at ambient pressure for a high-purity sample of the ionic liquid 1-hexyl- 3-methylimidazolium bis(trifluoromethylsulfonyl)imide, [C6mim][Tf2N], and its mixtures with water. Density was measured with two vibrating tube densimeters in the temperature range (258.15 to 373.15) K. Dynamic viscosity was determined with a rotational coaxial cylinder measuring system over the temperature range (258.15 to 373.15) K, and kinematic viscosity was measured at (293.15 and 298.15) K with an Ubbelohde capillary viscometer. Speed of sound was measured in a pulse-echo cell over the temperature range (283.15 to 343.15) K. Electrolytic (ionic) conductivity was determined by use of the AC impedance bridge technique over the temperature range (288.15 to 323.15) K. For all of these measurements, special care was taken to control the concentration of water in the sample. The viscosity and electrolytic conductivity of ([C6mim][Tf2N] + H2O) depend strongly on the concentration of water. By Karl Fischer titration, the H2O mass fraction in the saturated ([C6mim][Tf2N] + H2O) mixture was found to be 0.0111 ( 0.0004 at 298.15 K and 0.0101 ( 0.0004 at 293.15 K.
Compounds
# Formula Name
1 C12H19F6N3O4S2 1-hexyl-3-methylimidazolium bis[(trifluoromethyl)sulfonyl]imide
2 H2O water
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Electrical conductivity, S/m ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Alternating current cell with electrodes
  • 5
  • POMD
  • 1
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Stabinger Viscometer
  • 19
  • POMD
  • 1
  • Speed of sound, m/s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • DSA 5000
  • 16
  • POMD
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 19
  • POMD
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 16
  • POMD
  • 2
  • 1
  • Speed of sound, m/s ; Liquid
  • Mass fraction - 2; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Pulse-echo method
  • 3
  • POMD
  • 2
  • 1
  • Mass density, kg/m3 ; Liquid
  • Mass fraction - 2; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 3
  • POMD
  • 2
  • 1
  • Mass fraction - 2 ; Liquid mixture 1
  • Temperature, K; Liquid mixture 1
  • Pressure, kPa; Liquid mixture 1
  • Liquid mixture 1
  • Liquid mixture 2
  • Titration method
  • 3
  • POMD
  • 2
  • 1
  • Electrical conductivity, S/m ; Liquid
  • Temperature, K; Liquid
  • Mass fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Alternating current cell with electrodes
  • 16
  • POMD
  • 2
  • 1
  • Kinematic viscosity, m2/s ; Liquid
  • Temperature, K; Liquid
  • Mass fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Capillary tube (Ostwald; Ubbelohde) method
  • 7