Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Experimental and Modeling Studies on the Solubility of d-Pantolactone in Four Pure Solvents and Ethanol Water Mixtures

Huang, C.[Cui], Xie, Z.[Zhiping], Xu, J.[Jinchao], Qin, Y.[Yujia], Du, Y.[Yanni], Du, S.[Shichao], Gong, J.[Junbo]
J. Chem. Eng. Data 2015, 60, 3, 870-875
ABSTRACT
The solubility of d-pantolactone in water, ethanol, methanol, ethyl acetate, and ethanol water mixtures was determined at temperatures between (278.15 and 318.15) K using a digital densitometer by a static method. The measured solubility data were correlated with Apelblat equation, van t Hoff equation, nonrandom two liquid model, and Wilson model. The results indicate that the Wilson model is the most suitable model in pure solvents and the Apelblat model is the best model in ethanol water mixtures.
Compounds
# Formula Name
1 C6H10O3 D-pantolactone
2 CH4O methanol
3 C2H6O ethanol
4 C4H8O2 ethyl acetate
5 H2O water
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • 5
  • Mole fraction - 1 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 1
  • Density calibration data
  • 7
  • POMD
  • 1
  • 5
  • Mass density, kg/m3 ; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Vibrating tube method
  • 7
  • POMD
  • 2
  • 1
  • Mole fraction - 1 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 1
  • Density calibration data
  • 7
  • POMD
  • 2
  • 1
  • Mass density, kg/m3 ; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Vibrating tube method
  • 6
  • POMD
  • 3
  • 1
  • Mole fraction - 1 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 1
  • Density calibration data
  • 7
  • POMD
  • 3
  • 1
  • Mass density, kg/m3 ; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Vibrating tube method
  • 6
  • POMD
  • 4
  • 1
  • Mole fraction - 1 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 1
  • Density calibration data
  • 7
  • POMD
  • 4
  • 1
  • Mass density, kg/m3 ; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Vibrating tube method
  • 6
  • POMD
  • 3
  • 1
  • 5
  • Mole fraction - 1 ; Liquid
  • Temperature, K; Liquid
  • Solvent: Mass fraction - 3; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 1
  • Density calibration data
  • 40
  • POMD
  • 3
  • 1
  • 5
  • Mass density, kg/m3 ; Liquid
  • Solvent: Mass fraction - 3; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Vibrating tube method
  • 26