Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Densities at Pressures up to 200 MPa and Atmospheric Pressure Viscosities of Ionic Liquids 1-Ethyl-3-methylimidazolium Methylphosphate, 1-Ethyl-3-methylimidazolium Diethylphosphate, 1-Butyl-3-methylimidazolium Acetate, and 1-Butyl-3-methylimidazolium Bis(trifluoromethylsulfonyl)imide

Hiraga, Y.[Yuya], Kato, A.[Aya], Sato, Y.[Yoshiyuki], Smith, R.[Richard]
J. Chem. Eng. Data 2015, 60, 3, 876-885
ABSTRACT
High pressure densities at (10 200) MPa over a range of temperatures and atmospheric pressure viscosities at (293 373) K for three ionic liquids (ILs) that are able to dissolve biomass, 1-ethyl-3-methylimidazolium methylphosphate ([emim][MP]), 1-ethyl-3-methylimidazolium diethylphosphate ([emim][DEP]), and 1-butyl-3-methylimidazolium acetate ([bmim][Ac]) are reported. Densities of the IL 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([bmim][Tf2N]) were measured at the same conditions to verify the apparatus and to extend the range of present data. The high pressure densities of [emim][MP] and [emim][DEP] are newly measured in this work. Combined expanded uncertainties of densities for [emim][MP], [emim][DEP], [bmim][Ac], and [bmim][Tf2N] were estimated to be 1.5 kg*m 3, 1.4 kg*m 3, 1.4 kg*m 3, and 1.7 kg*m 3, respectively. The Tait equation could correlate the experimental density data to within 0.03 % of average relative deviation. The derivative properties, isobaric expansivity, and isothermal compressibility were calculated using the Tait equation and it was observed that the isobaric expansivity decreased with increasing temperature. The trend of the isobaric expansivity and isothermal compressibility with temperature were in accordance with the theory of corresponding states using methanol for comparison.
Compounds
# Formula Name
1 C7H15N2O3P 1-ethyl-3-methylimidazolium methyl phosphonate
2 C10H21N2O4P 1-ethyl-3-methylimidazolium diethyl phosphate
3 C10H18N2O2 1-butyl-3-methylimidazolium acetate
4 C10H15F6N3O4S2 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 9
  • POMD
  • 1
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Concentric cylinders viscometry
  • 9
  • POMD
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Bellows volumetry
  • 120
  • POMD
  • 2
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 9
  • POMD
  • 2
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Concentric cylinders viscometry
  • 9
  • POMD
  • 2
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Bellows volumetry
  • 120
  • POMD
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 9
  • POMD
  • 3
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Concentric cylinders viscometry
  • 9
  • POMD
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Bellows volumetry
  • 80
  • POMD
  • 4
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 9
  • POMD
  • 4
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Concentric cylinders viscometry
  • 9
  • POMD
  • 4
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Bellows volumetry
  • 120