Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Densities, Viscosities and Refractive Indices of the Ternary Mixture Dimethyladipate + 2-Butanone + 1-Butanol at T = (288.15 to 323.15) K

Knezevic-Stevanovic, A. B.[Andjela B.], Radovic, I. R.[Ivona R.], Serbanovic, S. P.[Slobodan P.], Kijevcanin, M. L.[Mirjana Lj.]
J. Chem. Eng. Data 2014, 59, 12, 4133-4150
ABSTRACT
Excess molar volumes VE, refractive index deviations ?nD, and viscosity deviations ?? of the ternary dimethyladipate + 2-butanone + 1-butanol and binary 2-butanone + 1-butanol systems are determined from the measured densities ?, refractive indices nD, and viscosities ?. Viscosities and viscosity deviations of the binary dimethyladipate + 2-butanone system are also presented. Measurements are carried out at eight temperatures from (288.15 to 323.15) K and at an ambient pressure of 0.1 MPa. Instruments from Anton Paar were utilized: a digital vibrating tube densimeter type DMA 5000, RXA 156 refractometer, and SVM 3000/G2 digital Stabinger viscometer. Excess properties of the binary system were fitted to the Redlich Kister polynomial equation, whereas for the ternary system, the Nagata Tamura equation was applied. To try to comprehend the nature of the interactions between compounds that cause nonideal behavior in mixtures, FT-IR spectra of the binary constituents were collected at T = 298.15 K. VE data of the investigated ternary system show both negative and positive deviations from the ideal behavior. On the other hand, viscosity changes are negative, while changes in refractive indices are positive over the entire concentration area at all investigated temperatures.
Compounds
# Formula Name
1 C8H14O4 dimethyl 1,6-hexanedioate
2 C4H8O butanone
3 C4H10O butan-1-ol
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 1
  • POMD
  • 1
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 1
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Concentric cylinders viscometry
  • 8
  • POMD
  • 2
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Concentric cylinders viscometry
  • 16
  • POMD
  • 2
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 8
  • POMD
  • 2
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 8
  • POMD
  • 3
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Concentric cylinders viscometry
  • 8
  • POMD
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 8
  • POMD
  • 3
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 8
  • POMD
  • 2
  • 1
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Concentric cylinders viscometry
  • 88
  • POMD
  • 3
  • 2
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Concentric cylinders viscometry
  • 88
  • POMD
  • 3
  • 2
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 88
  • POMD
  • 3
  • 2
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 88
  • POMD
  • 3
  • 2
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 1; Liquid
  • Mole fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 432
  • POMD
  • 3
  • 2
  • 1
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 1; Liquid
  • Mole fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 432
  • POMD
  • 3
  • 2
  • 1
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 1; Liquid
  • Mole fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Concentric cylinders viscometry
  • 432