Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Solubility and Solution Thermodynamics of Novel Bicyclic Derivatives of 1,3-Selenazine in Biological Relevant Solvents

blokhina, S.[Svetlana], Volkova, T.[Tatyana], Ol'Khovich, M.[Marina], Sharapova, a.[angelika], Proshin, A.[Alexey], Perlovich, G.[German]
J. Chem. Eng. Data 2014, 59, 7, 2298-2304
ABSTRACT
Drug-like N-substituted 1-selena-3-azaspiro[5,5]undec-2-en-2-amine hydrobromides (1:1) have been synthesized. Phenyl, isopropylphenyl, and fluorophenyl substituents were used. The solubility of the obtained compounds in pharmaceutically relevant solvents within the temperature range from (298.15 to 318.15) K has been measured using the isothermal saturation technique. All of the compounds studied appear to have poor solubility of 10 6 mole fraction in phosphate buffer pH 7.4 and hexane. The solubility values enlarge substantially to 10 2 and 10 4 mole fraction, respectively, in octanol and muriatic buffer solution pH 2.0. The solubility of the selenazines in aqueous media was shown to increase as the number of protonated forms grew. The high solubility of the compounds in octanol was found to depend on the formation of intermolecular solvent solute hydrogen bonds. Thermodynamic solubility functions for the substances in the solvents studied have been calculated. The solubility in all of the systems with the predominant enthalpy term of Gibbs energy was proved to increase as the dissolution enthalpy decreased.
Compounds
# Formula Name
1 C15H21BrN2Se N-phenyl-1-selena-3-azaspiro[5.5]undec-2-en-2-amine hydrobromide
2 C18H27BrN2Se N-(4-isopropylphenyl)-1-selena-3-azaspiro[5.5]undec-2-en-2-amine hydrobromide
3 C15H20BrFN2Se N-(4-fluorophenyl)-1-selena-3-azaspiro[5.5]undec-2-en-2-amine hydrobromide
4 C8H18O octan-1-ol
5 C6H14 hexane
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Normal melting temperature, K ; Crystal
  • Crystal
  • Liquid
  • Air at 1 atmosphere
  • DTA
  • 1
  • POMD
  • 1
  • Molar enthalpy of transition or fusion, kJ/mol ; Crystal
  • Crystal
  • Liquid
  • Air at 1 atmosphere
  • DSC
  • 1
  • POMD
  • 2
  • Normal melting temperature, K ; Crystal
  • Crystal
  • Liquid
  • Air at 1 atmosphere
  • DTA
  • 1
  • POMD
  • 2
  • Molar enthalpy of transition or fusion, kJ/mol ; Crystal
  • Crystal
  • Liquid
  • Air at 1 atmosphere
  • DSC
  • 1
  • POMD
  • 3
  • Normal melting temperature, K ; Crystal
  • Crystal
  • Liquid
  • Air at 1 atmosphere
  • DTA
  • 1
  • POMD
  • 3
  • Molar enthalpy of transition or fusion, kJ/mol ; Crystal
  • Crystal
  • Liquid
  • Air at 1 atmosphere
  • DSC
  • 1
  • POMD
  • 4
  • 1
  • Mole fraction - 1 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 1
  • Spectrophotometer UV spectral
  • 5
  • POMD
  • 5
  • 1
  • Mole fraction - 1 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 1
  • Spectrophotometer UV spectral
  • 5
  • POMD
  • 4
  • 2
  • Mole fraction - 2 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 2
  • Spectrophotometer UV spectral
  • 5
  • POMD
  • 5
  • 2
  • Mole fraction - 2 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 2
  • Spectrophotometer UV spectral
  • 5
  • POMD
  • 4
  • 3
  • Mole fraction - 3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 3
  • Spectrophotometer UV spectral
  • 5
  • POMD
  • 5
  • 3
  • Mole fraction - 3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 3
  • Spectrophotometer UV spectral
  • 5