Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Effect of Water on the Density, Viscosity, and CO2 Solubility in Choline Chloride/Urea

Xie, Y.[Yujiao], Dong, H.[Haifeng], Zhang, S.[Suojiang], Lu, X.[Xiaohua], Ji, X.[Xiaoyan]
J. Chem. Eng. Data 2014, 59, 11, 3344-3352
ABSTRACT
To study the effect of water on the properties of choline chloride (ChCl)/urea mixtures (1:2 on a molar basis), the density and viscosity of ChCl/urea (1:2) with water were measured at temperatures from 298.15 K to 333.15 K at atmospheric pressure, the CO2 solubility in ChCl/urea (1:2) with water was determined at 308.2 K, 318.2 K, and 328.2 K and at pressures up to 4.5 MPa. The results show that the addition of water significantly decreases the viscosity of ChCl/urea (1:2), whereas the effects on their density and CO2 solubility are much weaker. The CO2 solubility in ChCl/urea (1:2) with water was represented with the Nonrandom-Two-Liquid Redlich Kwong (NRTL-RK) model. The excess molar volume and excess molar activation energy were further determined. The CO2 absorption enthalpy was calculated and dominated by the CO2 dissolution enthalpy, and the magnitude of the CO2 dissolution enthalpy decreases with the increase of water content.
Compounds
# Formula Name
1 CH4N2O urea
2 C5H14ClNO choline chloride
3 H2O water
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • 2
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 3; Liquid
  • Pressure, kPa; Liquid
  • Solvent: Amount ratio of component to other component of binary solvent - 1; Liquid
  • Liquid
  • VIBTUB:UFactor:2
  • 72
  • POMD
  • 1
  • 2
  • 3
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 3; Liquid
  • Pressure, kPa; Liquid
  • Solvent: Amount ratio of component to other component of binary solvent - 1; Liquid
  • Liquid
  • CONCYL:UFactor:2
  • 72
  • POMD
  • 1
  • 2
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Amount ratio of solute to solvent - 1; Liquid
  • Liquid
  • VIBTUB:UFactor:2
  • 8
  • POMD
  • 1
  • 2
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Amount ratio of solute to solvent - 1; Liquid
  • Liquid
  • CONCYL:UFactor:2
  • 8