Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Solid Liquid Equilibria, Excess Molar Volumes, and Deviations in the Molar Refractivity for the Binary Systems of Alamine 304-1 + Decane, Dodecane, or Dodecanol

Jeong, I.[InYong], Kwon, R.-H.[Rak-Hyun], Park, S.-J.[So-Jin], Choi, Y.-Y.[Young-Yoon]
J. Chem. Eng. Data 2014, 59, 2, 289-294
ABSTRACT
Solvent extraction is widely used for the separation of metals from aqueous acid leaching solutions of metal ore. Employing the appropriate solvents and diluents for different metal ores is very important not only for developing appropriate extraction and purification processes but also for recycling the solvent and diluents. Crystallization is an inexpensive recycling process. In this work, therefore, solid liquid equilibrium (SLE) data for systems containing Alamine 304-1, a commercial amine solvent, were collected at atmospheric pressure. Specifically, the following systems were studied: {Alamine 304-1 + decane}, {Alamine 304-1 + dodecane}, and {Alamine 304-1 + 1-dodecanol}. The experimental data were correlated using the nonrandom-two-liquid (NRTL) model. In addition, the physical properties, excess molar volumes (VE) and deviations in the molar refractivity (?R) of these binary systems at 298.15 K were reported. The measured VE and ?R data fit the Redlich Kister equation well.
Compounds
# Formula Name
1 C36H75N tridodecylamine
2 C10H22 decane
3 C12H26 dodecane
4 C12H26O dodecan-1-ol
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 1
  • POMD
  • 1
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 1
  • Normal melting temperature, K ; Crystal
  • Crystal
  • Liquid
  • Air at 1 atmosphere
  • VISOBS:UFactor:2
  • 1
  • POMD
  • 2
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 1
  • POMD
  • 2
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 2
  • Normal melting temperature, K ; Crystal
  • Crystal
  • Liquid
  • Air at 1 atmosphere
  • VISOBS::UFactor:2
  • 1
  • POMD
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 1
  • POMD
  • 3
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 3
  • Normal melting temperature, K ; Crystal
  • Crystal
  • Liquid
  • Air at 1 atmosphere
  • VISOBS:UFactor:4
  • 1
  • POMD
  • 4
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 1
  • POMD
  • 4
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 4
  • Normal melting temperature, K ; Crystal
  • Crystal
  • Liquid
  • Air at 1 atmosphere
  • VISOBS::UFactor:2
  • 1
  • POMD
  • 1
  • 2
  • Mass density, kg/m3 ; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • VIBTUB:UFactor:4
  • 11
  • POMD
  • 1
  • 2
  • Refractive index (Na D-line) ; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 11
  • POMD
  • 1
  • 2
  • Solid-liquid equilibrium temperature, K ; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 2
  • VISOBS:UFactor:2
  • 3
  • POMD
  • 1
  • 2
  • Solid-liquid equilibrium temperature, K ; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 1
  • VISOBS:UFactor:2
  • 14
  • POMD
  • 1
  • 3
  • Mass density, kg/m3 ; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • VIBTUB:UFactor:4
  • 11
  • POMD
  • 1
  • 3
  • Refractive index (Na D-line) ; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 11
  • POMD
  • 1
  • 3
  • Solid-liquid equilibrium temperature, K ; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 3
  • VISOBS:UFactor:4
  • 4
  • POMD
  • 1
  • 3
  • Solid-liquid equilibrium temperature, K ; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 1
  • VISOBS:UFactor:4
  • 9
  • POMD
  • 1
  • 4
  • Mass density, kg/m3 ; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • VIBTUB:UFactor:4
  • 11
  • POMD
  • 1
  • 4
  • Refractive index (Na D-line) ; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 11
  • POMD
  • 1
  • 4
  • Solid-liquid equilibrium temperature, K ; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 4
  • VISOBS:UFactor:2
  • 7
  • POMD
  • 1
  • 4
  • Solid-liquid equilibrium temperature, K ; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 1
  • VISOBS:UFactor:2
  • 6