Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Electrical Conductance of Some Tetraalkylammonium Bromide Salts in 2-Butoxyethanol (1) + Water (2) mixtures at (298.15, 303.15, 308.15, and 313.15) K

Das, C.[Chanchal]
J. Chem. Eng. Data 2014, 59, 2, 168-175
ABSTRACT
Conductance measurements of tetramethylammonium bromide (Me4NBr), tetraethylammonium bromide (Et4NBr), and tetrapropylammonium bromide (Pr4NBr) solutions in 2-butoxyethanol (1) + water (2) mixture with 0.20, 0.40, and 0.60 mass fraction of 2-butoxyethanol were reported at (298.15, 303.15, 308.15, and 313.15) K. The experimental values of electrical conductances are analyzed using the 1978 Fuoss conductance concentration equation to obtain values of limiting molar conductance (?0), ionic association constant (KA) and the association diameter (R). The values of KA and R obtained for these three salts, namely, tetramethylammonium bromide, tetraethylammonium bromide, and tetrapropylammonium bromide suggest a weak electrostatic ion solvent interaction. Besides, they exist as free ions in all the solvents compositions and temperature range covered in this study. The Walden products for the ions show perceptible variations under increasing temperature and in different solvent composition.
Compounds
# Formula Name
1 C8H20BrN tetraethylammonium bromide
2 C12H28BrN tetrapropylammonium bromide
3 C6H14O2 2-butoxyethan-1-ol
4 H2O water
5 C4H12BrN tetramethylammonium bromide
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Pycnometric method
  • 1
  • POMD
  • 3
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Capillary tube (Ostwald; Ubbelohde) method
  • 1
  • POMD
  • 5
  • 3
  • 4
  • Molar conductivity, S*m2/mol ; Liquid
  • Temperature, K; Liquid
  • Solvent: Mass fraction - 3; Liquid
  • Molality, mol/kg - 5; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Alternating current cell with electrodes
  • 96
  • POMD
  • 1
  • 3
  • 4
  • Molar conductivity, S*m2/mol ; Liquid
  • Temperature, K; Liquid
  • Solvent: Mass fraction - 3; Liquid
  • Molality, mol/kg - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Alternating current cell with electrodes
  • 96
  • POMD
  • 3
  • 2
  • 4
  • Molar conductivity, S*m2/mol ; Liquid
  • Temperature, K; Liquid
  • Solvent: Mass fraction - 3; Liquid
  • Molality, mol/kg - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Alternating current cell with electrodes
  • 96
  • POMD
  • 3
  • 4
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Mass fraction - 3; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Pycnometric method
  • 16
  • POMD
  • 3
  • 4
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Mass fraction - 3; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Capillary tube (Ostwald; Ubbelohde) method
  • 16