Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Thermal Conductivities of [EMIM][EtSO4], [EMIM][EtSO4] + C2H5OH, [EMIM][EtSO4] + H2O, and [EMIM][EtSO4] + C2H5OH + H2O at T = (283.15 to 343.15) K

Chen, Q.-L.[Qiao-Li], Wu, K.-J.[Ke-Jun], He, C.-H.[Chao-Hong]
J. Chem. Eng. Data 2013, 58, 7, 2058-2064
ABSTRACT
The thermal conductivities of 1-ethyl-3-methylimidazol-3-ium ethylsulfate, 1-ethyl-3-methylimidazol-3-ium ethylsulfate + ethanol, 1-ethyl-3-methylimidazol-3-ium ethylsulfate + water, and 1-ethyl-3-methylimidazol-3-ium ethylsulfate + ethanol + water were reported. The measurements were performed in the temperature range from (283.15 to 343.15) K by a transient hot-wire technique covering the whole composition range at atmospheric pressure. The uncertainty of experimental thermal conductivity is 2.0 % with a coverage factor of k = 2. The second-order Scheffe polynomial was used to correlate the temperature and composition dependence of the experimental thermal conductivities for both binary and ternary mixtures. The average absolute deviation of those calculated values from the experimental data was 0.64 %.
Compounds
# Formula Name
1 C8H16N2O4S 1-ethyl-3-methylimidazolium ethyl sulfate
2 C2H6O ethanol
3 H2O water
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Thermal conductivity, W/m/K ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Hot wire method
  • 8
  • POMD
  • 2
  • Thermal conductivity, W/m/K ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Hot wire method
  • 7
  • POMD
  • 3
  • Thermal conductivity, W/m/K ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Hot wire method
  • 7
  • POMD
  • 2
  • 3
  • 1
  • Thermal conductivity, W/m/K ; Liquid
  • Temperature, K; Liquid
  • Mass fraction - 1; Liquid
  • Mass fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Hot wire method
  • 168
  • POMD
  • 3
  • 1
  • Thermal conductivity, W/m/K ; Liquid
  • Temperature, K; Liquid
  • Mass fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Hot wire method
  • 63
  • POMD
  • 2
  • 1
  • Thermal conductivity, W/m/K ; Liquid
  • Temperature, K; Liquid
  • Mass fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Hot wire method
  • 63