Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Solubility of Sodium Salts in Ammonium-Based Deep Eutectic Solvents

Bagh, F. S. G.[Fatemeh Saadat Ghareh], Mjalli, F. S.[Farouq S.], Hashim, M. A.[Mohd Ali], Hadj-Kali, M. K. O.[Mohamed Kamel Omar], AlNashef, I. N.[Inas N.]
J. Chem. Eng. Data 2013, 58, 8, 2154-2162
ABSTRACT
The solubility of sodium chloride (NaCl), sodium bromide (NaBr), and sodium carbonate (Na2CO3) was measured in nine ammonium-based deep eutectic solvents (DESs). The aim of the study is to assess the potential use of these DESs as solvents and electrolytes for the separation of sodium metal from its salts. The studied DESs were prepared by combining ammonium salts with various hydrogen-bond donors (HBDs) or metal halides. It was found that the solubility of the sodium salts in DESs increases with temperature in many cases. The maximum solubility of NaCl achieved was 100 w = 80 in N,N-diethylethanolammonium chloride:zinc(II) chloride (molar ratio 1:3) at 90 deg C. In addition, the solubility of the sodium salts was modeled successfully using the non-random two liquid (NRTL) model.
Compounds
# Formula Name
1 C5H14ClNO choline chloride
2 C2H6O2 1,2-ethanediol
3 ClNa sodium chloride
4 CNa2O3 sodium carbonate
5 BrNa sodium bromide
6 C3H8O3 glycerol
7 C6H16ClNO 2-(diethylamino)ethanol hydrochloride
8 Cl2Zn zinc chloride
9 Cl3Fe ferric chloride
10 Cl2Sn tin(II) chloride
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • 2
  • 3
  • Mass fraction - 3 ; Liquid
  • Temperature, K; Liquid
  • Solvent: Amount ratio of component to other component of binary solvent - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 3
  • shake-flask method
  • 16
  • POMD
  • 1
  • 2
  • 4
  • Mass fraction - 4 ; Liquid
  • Temperature, K; Liquid
  • Solvent: Amount ratio of component to other component of binary solvent - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 4
  • shake-flask method
  • 16
  • POMD
  • 1
  • 2
  • 5
  • Mass fraction - 5 ; Liquid
  • Temperature, K; Liquid
  • Solvent: Amount ratio of component to other component of binary solvent - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 5
  • shake-flask method
  • 16
  • POMD
  • 6
  • 1
  • 3
  • Mass fraction - 3 ; Liquid
  • Temperature, K; Liquid
  • Solvent: Amount ratio of component to other component of binary solvent - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 3
  • shake-flask method
  • 23
  • POMD
  • 6
  • 1
  • 5
  • Mass fraction - 5 ; Liquid
  • Temperature, K; Liquid
  • Solvent: Amount ratio of component to other component of binary solvent - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 5
  • shake-flask method
  • 18
  • POMD
  • 2
  • 3
  • 7
  • Mass fraction - 3 ; Liquid
  • Temperature, K; Liquid
  • Solvent: Amount ratio of component to other component of binary solvent - 7; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 3
  • shake-flask method
  • 24
  • POMD
  • 6
  • 3
  • 7
  • Mass fraction - 3 ; Liquid
  • Temperature, K; Liquid
  • Solvent: Amount ratio of component to other component of binary solvent - 7; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 3
  • shake-flask method
  • 18
  • POMD
  • 1
  • 8
  • 3
  • Mass fraction - 3 ; Liquid
  • Temperature, K; Liquid
  • Solvent: Amount ratio of component to other component of binary solvent - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 3
  • shake-flask method
  • 20
  • POMD
  • 1
  • 8
  • 5
  • Mass fraction - 5 ; Liquid
  • Temperature, K; Liquid
  • Solvent: Amount ratio of component to other component of binary solvent - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 5
  • shake-flask method
  • 21
  • POMD
  • 8
  • 3
  • 7
  • Mass fraction - 3 ; Liquid
  • Temperature, K; Liquid
  • Solvent: Amount ratio of component to other component of binary solvent - 7; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 3
  • shake-flask method
  • 28
  • POMD
  • 3
  • 9
  • 7
  • Mass fraction - 3 ; Liquid
  • Temperature, K; Liquid
  • Solvent: Amount ratio of component to other component of binary solvent - 7; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 3
  • shake-flask method
  • 4
  • POMD
  • 1
  • 3
  • 10
  • Mass fraction - 3 ; Liquid
  • Solvent: Amount ratio of component to other component of binary solvent - 10; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 3
  • x
  • 1