Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Ionic Conductivities of Binary Mixtures Containing Pyridinium-Based Ionic Liquids and Alkanols

Garcia-Mardones, M.[Monica], Osorio, H. M.[Henrry M.], Lafuente, C.[Carlos], Gascon, I.[Ignacio]
J. Chem. Eng. Data 2013, 58, 6, 1613-1620
ABSTRACT
In this study, we have determined ionic conductivities of six binary systems composed of an ionic liquid (1-butylpyridinium tetrafluoroborate, 1-butyl-3methylpyridinium tetrafluoroborate, or 1-butyl-4methylpyridinium tetrafluoroborate) and a short chain alkanol (methanol or ethanol) at four temperatures, T = (293.15, 303.15, 313.15, and 323.15) K. The ionic conductivity data have been correlated using both an empirical equation and the Vogel Tamman Fulcher equation. We also have compared the behavior of different mixtures, paying special attention to the influence of methyl group in the pyridine ring and the effect of both alkanols in the mixtures. Ionic conductivities of all the mixtures are bigger than those of the pure components and present a maximum at small mole fractions of the ionic liquid. Moreover, conductivity values are bigger for the binary mixtures containing methanol instead or ethanol. Finally, the relationship between viscosity and ionic conductivity from Walden's rule has provided a measurement of the ionicity of the mixtures.
Compounds
# Formula Name
1 C9H14BF4N 1-butylpyridinium tetrafluoroborate
2 C10H16BF4N 1-butyl-3-methylpyridinium tetrafluoroborate
3 C10H16BF4N 1-butyl-4-methylpyridinium tetrafluoroborate
4 CH4O methanol
5 C2H6O ethanol
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Electrical conductivity, S/m ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Voltage change across transformer (no electrode)
  • 4
  • POMD
  • 2
  • Electrical conductivity, S/m ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Voltage change across transformer (no electrode)
  • 4
  • POMD
  • 3
  • Electrical conductivity, S/m ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Voltage change across transformer (no electrode)
  • 4
  • POMD
  • 4
  • 1
  • Electrical conductivity, S/m ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Voltage change across transformer (no electrode)
  • 88
  • POMD
  • 5
  • 1
  • Electrical conductivity, S/m ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Voltage change across transformer (no electrode)
  • 75
  • POMD
  • 4
  • 2
  • Electrical conductivity, S/m ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Voltage change across transformer (no electrode)
  • 76
  • POMD
  • 5
  • 2
  • Electrical conductivity, S/m ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Voltage change across transformer (no electrode)
  • 76
  • POMD
  • 4
  • 3
  • Electrical conductivity, S/m ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 3; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Voltage change across transformer (no electrode)
  • 72
  • POMD
  • 5
  • 3
  • Electrical conductivity, S/m ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 3; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Voltage change across transformer (no electrode)
  • 92