Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Isobaric Vapor Liquid Equilibria for the Binary and Ternary Systems of 2-Methyl-1-butanol, 2-Methyl-butanol Acetate, and Dimethylformamide (DMF) at 101.3 kPa

Zhu, T.-F.[Tang-Feng], Yao, S.[Shun], Wang, Z.-D.[Zhuo-Duan], Liu, W.[Wen], Song, H.[Hang]
J. Chem. Eng. Data 2013, 58, 5, 1156-1160
ABSTRACT
Isobaric vapor liquid equilibrium data (VLE) for two binary systems, 2-methyl-1-butanol (1) + dimethylformamide (DMF) (3) and 2-methyl-butanol acetate (2) + DMF (3), and the ternary system 2-methyl-1-butanol (1) + 2-methyl-butanol acetate (2) + DMF (3) were measured in a modified Rose recirculation still at 101.3 kPa. Wilson and nonrandom two-liquid (NRTL) models were applied to correlate the binary systems VLE data, which had been examined by thermodynamic consistency test in the first place, and the model parameters were obtained. These parameters were used to predict the ternary VLE data, which yielded a good agreement with the experimental values.
Compounds
# Formula Name
1 C5H12O 2-methyl-1-butanol
2 C7H14O2 2-methylbutyl ethanoate
3 C3H7NO dimethylformamide
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Normal boiling temperature, K ; Liquid
  • Liquid
  • Gas
  • mercury-in-glass thermometers
  • 1
  • POMD
  • 1
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 1
  • POMD
  • 2
  • Normal boiling temperature, K ; Liquid
  • Liquid
  • Gas
  • mercury-in-glass thermometers
  • 1
  • POMD
  • 2
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 2
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 1
  • POMD
  • 3
  • Normal boiling temperature, K ; Liquid
  • Liquid
  • Gas
  • mercury-in-glass thermometers
  • 1
  • POMD
  • 3
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 1
  • POMD
  • 3
  • 1
  • Boiling temperature at pressure P, K ; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Gas
  • Ebulliometric method (Recirculating still)
  • 14
  • POMD
  • 3
  • 1
  • Mole fraction - 1 ; Gas
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Gas
  • Liquid
  • Chromatography
  • 14
  • POMD
  • 3
  • 2
  • Boiling temperature at pressure P, K ; Liquid
  • Mole fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Gas
  • EBULLIO:UFactor:2
  • 14
  • POMD
  • 3
  • 2
  • Mole fraction - 2 ; Gas
  • Mole fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Gas
  • Liquid
  • Chromatography
  • 14
  • POMD
  • 3
  • 1
  • 2
  • Mole fraction - 2 ; Liquid
  • Mole fraction - 2 ; Gas
  • Mole fraction - 1 ; Gas
  • Temperature, K; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Gas
  • Chromatography
  • Chromatography
  • Chromatography
  • 12