Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Liquid-Phase p-rho-T Data for 2,3,3,3-Tetrafluoroprop-1-ene (R-1234yf) and 1,1,2,3,3,3-Hexafluoroprop-1-ene (R-1216) at Temperatures from (208 to 353) K under Pressures up to 40 MPa

Klomfar, J.[Jaroslav], Souckova, M.[Monika], Patek, J.[Jaroslav]
J. Chem. Eng. Data 2012, 57, 11, 3283-3289
ABSTRACT
Experimental data on the pressure density temperature relation are reported for two fluorinated alkenes that meet the criteria of the potential new-generation refrigerants with considerably low global warming potential (GWP) and the zero ozone depletion potential (ODP). The data for 2,3,3,3-tetrafluoroprop-1-ene (R-1234yf) and 1,1,2,3,3,3-hexafluoroprop-1-ene (R-1216) were obtained with a constant volume apparatus at temperatures from (217 to 353) K and from (208 to 353) K, respectively, and at pressures from (1 to 40) MPa. Thus, the temperature pressure region covered with experimental p ? T data has been substantially extended for both substances. The combined uncertainty at the 0.95 confidence level of the reported density data takes its maximum value at the lower end of the temperature interval: 1.2 kg*m 3 (9*10 4 ?) for R-1234yf and 1.4 kg*m 3 (10 3 ?) for R-1216. The root-mean-square deviation of the reported data from the Helmholtz free energy equation of state fitted to them is 0.18 kg*m 3 (1.6*10 4 ?) for R-1234yf and 0.28 kg*m 3 (2.1*10 4 ?) for R-1216.
Compounds
# Formula Name
1 C3H2F4 2,3,3,3-tetrafluoro-1-propene
2 C3F6 hexafluoropropene
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Pycnometric method
  • 1
  • POMD
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • ISOCHOR
  • 89
  • POMD
  • 2
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Pycnometric method
  • 1
  • POMD
  • 2
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • ISOCHOR
  • 83