Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Liquid Liquid Equilibrium for the Ternary System 2-Methyl-1-propanol + 3-Methyl-1-butanol + Water at (298.15, 323.15, and 348.15) K

Wang, Y.[Yinglong], Liu, Y.[Ying]
J. Chem. Eng. Data 2012, 57, 10, 2689-2695
ABSTRACT
Liquid liquid equilibrium (LLE) data for the ternary system 2-methyl-1-propanol + 3-methyl-1-butanol + water have been measured at (298.15, 323.15, and 348.15) K, respectively, under atmospheric pressure in this article. The Othmer Tobias and Bachman equations were used to check the reliability of the obtained tie-line data. In addition, both NRTL (nonrandom two-liquid) and UNIQUAC (universal quasichemical) activity coefficient models were applied to the ternary system, and the relevant interaction parameters were regressed with the experimental data. The predicted values by both methods were compared with the measured experimental data. The consistency of the two models was excellent, with a better prediction by the NRTL model with a parameter a of 0.3. The obtained interaction parameters of both models can be used in the calculation of the liquid liquid phase equilibrium of aqueous solution comprising 2-methyl-1-propanol and 3-methyl-1-butanol as well as for the design and optimization of the related separation process.
Compounds
# Formula Name
1 C4H10O 2-methyl-1-propanol
2 C5H12O 3-methylbutan-1-ol
3 H2O water
4 C2H6O ethanol
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 1
  • POMD
  • 2
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 2
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 1
  • POMD
  • 3
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 1
  • POMD
  • 4
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 4
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 1
  • POMD
  • 1
  • 2
  • 3
  • Mole fraction - 2 ; Liquid mixture 2
  • Mole fraction - 2 ; Liquid mixture 1
  • Mole fraction - 1 ; Liquid mixture 1
  • Temperature, K; Liquid mixture 1
  • Mole fraction - 1; Liquid mixture 2
  • Pressure, kPa; Liquid mixture 2
  • Liquid mixture 2
  • Liquid mixture 1
  • Chromatography
  • Chromatography
  • Chromatography
  • 33