Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Solubility Measurements and Saturated Liquid Properties of Ternary Systems (Methane + Decane + Octadecane) at 295 K

Nourozieh, H.[Hossein], Kariznovi, M.[Mohammad], Abedi, J.[Jalal]
J. Chem. Eng. Data 2012, 57, 9, 2513-2519
ABSTRACT
Experimental vapor liquid equilibrium (VLE) data have been measured for the ternary system (methane + decane + octadecane) at 295 K over the pressure range (1 to 8) MPa using a PVT apparatus that was designed in-house. Three different (decane + octadecane) binary mixtures were prepared, and the solubility and phase equilibria of these prepared mixtures with methane were studied. The experimental information of saturated liquid phase composition, density, and viscosity was reported at each pressure. The VLE data were correlated with the Soave Redlich Kwong (SRK) and Peng Robinson (PR) equations of state (EOS's). The adjustment of binary interaction parameters and the volume translation technique has been employed to correlate the experimental compositions and densities. The adjusted binary parameters from the VLE data of binary pairs (methane + decane) and (methane + octadecane) were used to correlate the generated ternary VLE data. The calculated ternary VLE compositions were found to be in good agreement with the experimental data using the binary parameters from the VLE data of binary pairs for both EOS's. According to the results for the saturated liquid densities, more accurate predictions of the experimental data were obtained using the PR EOS than the SRK EOS.
Compounds
# Formula Name
1 CH4 methane
2 C10H22 decane
3 C18H38 octadecane
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 2
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Mole fraction - 2; Liquid
  • Liquid
  • Vibrating tube method
  • 30
  • POMD
  • 1
  • 2
  • 3
  • Viscosity, Pa*s ; Liquid
  • Pressure, kPa; Liquid
  • Mole fraction - 1; Liquid
  • Mole fraction - 2; Liquid
  • Liquid
  • Gas
  • Falling or rolling sphere viscometry
  • 24
  • POMD
  • 1
  • 2
  • 3
  • Boiling temperature at pressure P, K ; Liquid
  • Pressure, kPa; Liquid
  • Mole fraction - 1; Liquid
  • Mole fraction - 2; Liquid
  • Liquid
  • Gas
  • Ebulliometric method (Recirculating still)
  • 24
  • POMD
  • 1
  • 2
  • 3
  • Mass density, kg/m3 ; Liquid
  • Pressure, kPa; Liquid
  • Mole fraction - 1; Liquid
  • Mole fraction - 2; Liquid
  • Liquid
  • Gas
  • Vibrating tube method
  • 24
  • POMD
  • 1
  • 2
  • 3
  • Mole fraction - 1 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Mole fraction - 2; Liquid
  • Liquid
  • Gas
  • Chromatography
  • 24