Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Vapor Liquid Phase Equilibria and Physical Properties Measurements for Ternary Systems (Methane + Decane + Hexadecane)

Kariznovi, M.[Mohammad], Nourozieh, H.[Hossein], Abedi, J.[Jalal]
J. Chem. Eng. Data 2012, 57, 9, 2535-2542
ABSTRACT
The vapor liquid equilibrium (VLE) data for ternary systems (methane + decane + hexadecane) have been determined using a designed pressure volume temperature (PVT) apparatus. Three different (decane + hexadecane) binary mixtures were prepared, and the solubility and phase equilibria of three prepared mixtures with methane at ambient temperature and different pressures from (1 to 8) MPa were studied. The phase composition and saturated liquid density and viscosity were reported for each pressure. The VLE data of the ternary mixtures were correlated using Soave Redlich Kwong and Peng Robinson equations of state. The equations of state models with their best-fitted parameters of the binary systems, (methane + decane and methane + hexadecane), were used to predict the VLE data of ternary systems. Both equations of state were found to be capable of describing the phase equilibria of binary pairs and ternary systems over the range of studied conditions. The Peng Robinson equation of state gave better predictions of saturated liquid densities than those of the Soave Redlich Kwong equation of state.
Compounds
# Formula Name
1 C10H22 decane
2 CH4 methane
3 C16H34 hexadecane
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • 3
  • Mass density, kg/m3 ; Liquid
  • Mole fraction - 1; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 30
  • POMD
  • 2
  • 1
  • 3
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 2; Liquid
  • Mole fraction - 1; Liquid
  • Liquid
  • Gas
  • Moving piston method
  • 24
  • POMD
  • 2
  • 1
  • 3
  • Vapor or sublimation pressure, kPa ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 2; Liquid
  • Mole fraction - 1; Liquid
  • Liquid
  • Gas
  • Ebulliometric method (Recirculating still)
  • 24
  • POMD
  • 2
  • 1
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 2; Liquid
  • Mole fraction - 1; Liquid
  • Liquid
  • Gas
  • Vibrating tube method
  • 24
  • POMD
  • 2
  • 1
  • 3
  • Mole fraction - 2 ; Gas
  • Temperature, K; Liquid
  • Mole fraction - 2; Liquid
  • Mole fraction - 1; Liquid
  • Gas
  • Liquid
  • Chromatography
  • 24