Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Composition Dependent Physicochemical Property Data for the Binary System Water and the Ionic Liquid 1-Butyl-3-methylimidazolium Methanesulfonate ([C4mim][MeSO3])

Stark, A.[Annegret], Zidell, A.[Anthony], Russo, J. W.[Joseph W.], Hoffmann, M. M.[Markus M.]
J. Chem. Eng. Data 2012, 57, 12, 3330-3339
ABSTRACT
A number of composition dependent physicochemical properties were measured for the water [C4mim][MeSO3] binary system at 85 deg C. Specifically, we provide data for density, heat capacity, heats of dissolution, conductivity, viscosity, as well as the self-diffusion coefficients of the cation, anion, and water. Ionic liquids based on the MeSO3 anion constitute a suitable medium for various chemistries. This study addresses the need to provide physicochemical data on [C4mim][MeSO3] and the water [C4mim][MeSO3] binary systems that are currently unavailable. Additional analysis of the combined data is also presented to provide further insight into the molecular level behavior of the water [C4mim][MeSO3] binary system.
Compounds
# Formula Name
1 H2O water
2 C9H18N2O3S 1-butyl-3-methylimidazolium methanesulfonate
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 2
  • Electrical conductivity, S/m ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Alternating current cell with electrodes
  • 1
  • POMD
  • 2
  • Mass density, kg/m3 ; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Vibrating tube method
  • 1
  • POMD
  • 1
  • 2
  • Molar heat capacity at constant pressure, J/K/mol ; Liquid
  • Mass fraction - 1; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Small sample (50 mg) DSC
  • 10
  • POMD
  • 1
  • 2
  • Electrical conductivity, S/m ; Liquid
  • Mole fraction - 1; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Alternating current cell with electrodes
  • 30
  • POMD
  • 1
  • 2
  • Molar enthalpy of solution, kJ/mol ; Liquid
  • Mole fraction - 1; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Flow calorimetry
  • 28
  • POMD
  • 1
  • 2
  • Viscosity, Pa*s ; Liquid
  • Mole fraction - 1; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Falling or rolling sphere viscometry
  • 11
  • POMD
  • 1
  • 2
  • Mass density, kg/m3 ; Liquid
  • Mole fraction - 1; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 10
  • POMD
  • 1
  • 2
  • Mass density, kg/m3 ; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Vibrating tube method
  • 30