Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Solubility of 2-Butyl-3-benzofuranyl 4-(2-(Diethylamino)ethoxy)-3,5-diiodophenyl Ketone Hydrochloride (Amiodarone HCl) in Ethanol + Water and N-Methyl-2-pyrrolidone + Water Mixtures at Various Temperatures

Eghrary, S.[Shadi], Zarghami, R.[Reza], Martinez, F.[Fleming], Jouyban, A.[Abolghasem]
J. Chem. Eng. Data 2012, 57, 5, 1544-1550
ABSTRACT
The solubilities of amiodarone HCl (AMDH) in binary mixtures of ethanol + water and N-methyl pyrrolidone (NMP) + water at (293.2, 298.2, 303.2, 308.2, and 313.2) K are reported. In the ethanol + water system the maximum solubility of AMDH was observed at 313.2 K and an ethanol mass fraction of 0.76. The combination of the Jouyban Acree model and van't Hoff equation was used to predict the solubility of AMDH in the mixed solvents at different temperatures. A mean relative deviation of 12.2 % was obtained for the correlated data. The standard enthalpy, entropy ,and Gibbs energy changes of solutions for AMDH in ethanol + water and NMP + water mixtures were calculated from the measured solubility data using the modified version of the van't Hoff equation.
Compounds
# Formula Name
1 C2H6O ethanol
2 C25H30ClI2NO3 2-butyl-3-benzofuranyl 4-[2-(diethylamino)ethoxy]-3,5-diiodophenyl ketone hydrochloride
3 H2O water
4 C5H9NO N-methylpyrrolidone
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • 2
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 2
  • Pycnometric method
  • 5
  • POMD
  • 1
  • 2
  • Mole fraction - 2 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 2
  • Spectrophotometrical Assay
  • 5
  • POMD
  • 2
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 2
  • Pycnometric method
  • 5
  • POMD
  • 2
  • 3
  • Mole fraction - 2 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 2
  • Spectrophotometrical Assay
  • 7
  • POMD
  • 4
  • 2
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 2
  • Pycnometric method
  • 5
  • POMD
  • 4
  • 2
  • Mole fraction - 2 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 2
  • Spectrophotometrical Assay
  • 5
  • POMD
  • 1
  • 2
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Solvent: Mass fraction - 3; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 2
  • Pycnometric method
  • 55
  • POMD
  • 1
  • 2
  • 3
  • Mole fraction - 2 ; Liquid
  • Temperature, K; Liquid
  • Solvent: Mass fraction - 3; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 2
  • Spectrophotometrical Assay
  • 55
  • POMD
  • 4
  • 2
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Solvent: Mass fraction - 3; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 2
  • Pycnometric method
  • 55
  • POMD
  • 4
  • 2
  • 3
  • Mole fraction - 2 ; Liquid
  • Temperature, K; Liquid
  • Solvent: Mass fraction - 3; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 2
  • Spectrophotometrical Assay
  • 55