Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Solid Liquid Phase Equilibrium for the Ternary System K2SO4 + KH2PO4 + H2O at (298.15 and 333.15) K

Wang, P.[Pan], Li, J.[Jun], Luo, J.[Jianhong], Jin, Y.[Yang], Yang, Z.
J. Chem. Eng. Data 2012, 57, 3, 836-839
ABSTRACT
The ternary system of K2SO4 + KH2PO4 + H2O at (298.15 and 333.15) K was investigated by the method of isothermal solution saturation and moist residues. Thus the solubility data of the system were obtained, and phase diagrams of K2SO4 + KH2PO4 + H2O at (298.15 and 333.15) K were constructed on the basis of the solubility data. The solid phase in the system mentioned above was also identified. The crystallization field of potassium sulfate and potassium dihydrogen phosphate (KDP) were determined, and the crystallization field of potassium sulfate was larger than that of potassium dihydrogen phosphate. The density of saturated solutions for the systems studied at (298.15 and 333.15) K was also measured. The solubility data, density, and the phase equilibrium diagrams for the ternary system can provide the fundamental basis for the preparation of potassium dihydrogen phosphate in potassium sulfate and potassium dihydrogen phosphate aqueous mixtures.
Compounds
# Formula Name
1 H2O water
2 H2KO4P monopotassium phosphate
3 K2O4S potassium sulfate
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • 2
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 3
  • Crystal - 2
  • Pycnometric method
  • 6
  • POMD
  • 1
  • 2
  • 3
  • Mass fraction - 2 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 3
  • Crystal - 2
  • Titration method
  • 6
  • POMD
  • 1
  • 2
  • 3
  • Mass fraction - 3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 3
  • Crystal - 2
  • Titration method
  • 6
  • POMD
  • 1
  • 2
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Mass fraction - 3; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 2
  • Pycnometric method
  • 7
  • POMD
  • 1
  • 2
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Mass fraction - 3; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 3
  • Pycnometric method
  • 12
  • POMD
  • 1
  • 2
  • 3
  • Mass fraction - 2 ; Liquid
  • Temperature, K; Liquid
  • Mass fraction - 3; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 2
  • Titration method
  • 7
  • POMD
  • 1
  • 2
  • 3
  • Mass fraction - 2 ; Liquid
  • Temperature, K; Liquid
  • Mass fraction - 3; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 3
  • Titration method
  • 12