Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Molar Volumes and Heat Capacities of Aqueous Solutions of Short-Chain Aliphatic Sodium Carboxylates at 25 deg C

Bochmann, S.[Sebastian], May, P. M.[Peter M.], Hefter, G.[Glenn]
J. Chem. Eng. Data 2011, 56, 12, 5081-5087
ABSTRACT
Densities and isobaric heat capacities of the aqueous solutions of the sodium salts of the four smallest straight-chain aliphatic carboxylates: sodium methanoate (formate), ethanoate (acetate) n-propanoate, and n-butanoate have been measured at 25 deg C and 0.1 MPa by vibrating-tube densimetry and Picker flow calorimetry, respectively. All systems were investigated at concentrations ranging from approximately 0.02 mol*kg 1 to near saturation, which extends the existing database to higher concentrations for all of these salts. Apparent molar isobaric heat capacities and volumes derived from the data were fitted with an extended Redlich Meyer equation to determine the standard state partial molar quantities. At concentrations where comparisons were possible, the present results generally agreed well with previous determinations. An exception was the heat capacities of sodium formate solutions, where the present results at low solute concentrations appear to be influenced by an unidentified thermal effect. The apparent molar quantities, especially the heat capacities, provide indirect evidence of aggregation by the longer-chain aliphatic carboxylates at high concentrations.
Compounds
# Formula Name
1 CHNaO2 sodium methanoate
2 C3H5NaO2 sodium propanoate
3 C2H3NaO2 sodium ethanoate
4 C4H7NaO2 sodium butyrate
5 H2O water
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 3
  • 5
  • Molar heat capacity at constant pressure, J/K/mol ; Liquid
  • Molality, mol/kg - 3; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Flow calorimetry
  • 17
  • POMD
  • 3
  • 5
  • Mass density, kg/m3 ; Liquid
  • Molality, mol/kg - 3; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Vibrating tube method
  • 17
  • POMD
  • 2
  • 5
  • Molar heat capacity at constant pressure, J/K/mol ; Liquid
  • Molality, mol/kg - 2; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Flow calorimetry
  • 14
  • POMD
  • 2
  • 5
  • Mass density, kg/m3 ; Liquid
  • Molality, mol/kg - 2; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Vibrating tube method
  • 14
  • POMD
  • 4
  • 5
  • Molar heat capacity at constant pressure, J/K/mol ; Liquid
  • Molality, mol/kg - 4; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Flow calorimetry
  • 12
  • POMD
  • 4
  • 5
  • Mass density, kg/m3 ; Liquid
  • Molality, mol/kg - 4; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Vibrating tube method
  • 12
  • POMD
  • 1
  • 5
  • Molar heat capacity at constant pressure, J/K/mol ; Liquid
  • Molality, mol/kg - 1; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • FLOW:UFactor:2
  • 28
  • POMD
  • 1
  • 5
  • Mass density, kg/m3 ; Liquid
  • Molality, mol/kg - 1; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Vibrating tube method
  • 28