Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Isobaric Vapor Liquid Equilibria for the Extractive Distillation of Ethanol + Water Mixtures Using 1-Ethyl-3-methylimidazolium Dicyanamide

Orchilles, A. V., Miguel, P. J.[Pablo J.], Llopis, F. J.[Francisco J.], Vercher, E.[Ernesto], Martinez-Andreu, A.[Antoni]
J. Chem. Eng. Data 2011, 56, 12, 4875-4880
ABSTRACT
Isobaric vapor liquid equilibria (VLE) for the binary systems ethanol + 1-ethyl-3-methylimidazolium dicyanamide ([emim][DCA]) and water + [emim][DCA] as well as the VLE for the ternary system ethanol + water + [emim][DCA] have been obtained at 100 kPa using a recirculating still. The effect of [emim][DCA] on the ethanol + water system has been compared with that produced by another ionic liquid reported in the literature on the basis of the variation of solvent activity coefficients in ionic liquid (IL) + molecular solvent binary systems. From the results, [emim][DCA] appears as one of the best entrainers for the extractive distillation of the ethanol + water mixtures, causing the azeotrope to disappear at 100 kPa for ionic liquid mole fractions as low as 0.019. The experimental data were fitted with the Mock's electrolyte nonrandom two-liquid (NRTL) model, with a good agreement.
Compounds
# Formula Name
1 C2H6O ethanol
2 C8H11N5 1-ethyl-3-methylimidazolium dicyanamide
3 H2O water
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Vapor or sublimation pressure, kPa ; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Gas
  • EBULLIO:UFactor:2
  • 1
  • POMD
  • 1
  • 2
  • Boiling temperature at pressure P, K ; Liquid
  • Mole fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Gas
  • EBULLIO:UFactor:2
  • 39
  • POMD
  • 3
  • 2
  • Boiling temperature at pressure P, K ; Liquid
  • Mole fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Gas
  • EBULLIO:UFactor:2
  • 30
  • POMD
  • 1
  • 3
  • 2
  • Boiling temperature at pressure P, K ; Liquid
  • Mole fraction - 2; Liquid
  • Solvent: Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Gas
  • EBULLIO:UFactor:2
  • 54
  • POMD
  • 1
  • 3
  • 2
  • Mole fraction - 1 ; Gas
  • Mole fraction - 2; Liquid
  • Solvent: Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Gas
  • Liquid
  • Chromatography
  • 54