Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Densities and Viscosities of 1-Ethyl-3-methylimidazolium n-Alkyl Sulfates

Costa, A. J. L.[Anabela J.L.], Esperanca, J. M. S. S.[Jose M. S. S.], Marrucho, I. M.[Isabel M.], Rebelo, L. P. N.[Luis Paulo N.]
J. Chem. Eng. Data 2011, 56, 8, 3433-3441
ABSTRACT
Density and viscosity data for four 1-ethyl-3-methylimidazolium-based ionic liquids combined with alkyl sulfate, [CnSO4]- with n = 1, 4, 6, and 8, and hydrogen sulfate, [HSO4]-, anions were measured at atmospheric pressure in the temperature range 283 less than T/K less than 363. Isobaric thermal expansion coefficients were calculated from the density results. This work studies the effect of increasing the alkyl chain length of the sulfate-based anion on the density, viscosity, and related properties of this family of ionic liquids. The effective volumes of the distinct anions used were calculated from the measured density values, simply by subtracting the effective volume of the cation already available from literature to the molar volume of the ionic liquid. We also evaluated the predictive ability of group contribution methods for density and viscosity. Since large deviations between the predictions and the experimental data occurred for both density and viscosity, new group contribution parameters were proposed. The results clearly show that [HSO4]- cannot be considered part of the [CnSO4]- family.
Compounds
# Formula Name
1 C7H14N2O4S 1-ethyl-3-methylimidazolium methylsulfate
2 C10H20N2O4S 3-ethyl-1-methylimidazolium butyl sulfate
3 C12H24N2O4S 3-ethyl-1-methyl-1H-imidazolium hexyl sulfate
4 C6H12N2O4S 1-ethyl-3-methylimidazolium hydrogen sulfate
5 C14H28N2O4S 1-ethyl-3-methylimidazolium octyl sulfate
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Concentric cylinders viscometry
  • 19
  • POMD
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 71
  • POMD
  • 2
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Concentric cylinders viscometry
  • 19
  • POMD
  • 2
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 71
  • POMD
  • 3
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Concentric cylinders viscometry
  • 19
  • POMD
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 71
  • POMD
  • 4
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Concentric cylinders viscometry
  • 19
  • POMD
  • 4
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 71
  • POMD
  • 5
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Concentric cylinders viscometry
  • 19
  • POMD
  • 5
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 71