Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Vapor Liquid Equilibria and Interfacial Tensions of the System Ethanol + 2-Methoxy-2-methylbutane

Mejia, A.[Andres], Segura, H.[Hugo], Cartes, M.[Marcela]
J. Chem. Eng. Data 2011, 56, 7, 3142-3148
ABSTRACT
Isobaric vapor liquid equilibrium (VLE) data have been measured for the binary system ethanol + 2-methoxy-2-methylbutane at (50, 75, and 94 kPa) and over the temperature range (334 to 356) K. Equilibrium determinations were performed in a VLE still with circulation of both phases. The dependence of interfacial tensions of this mixture on concentration was also determined at atmospheric pressure and 303.15 K, using the maximum differential bubble pressure technique. According to experimental results, the mixture exhibits a positive deviation and a minimum boiling point azeotrope for which the mole fraction impoverishes in ethanol as pressure (or temperature) increases. In addition, the determined interfacial tensions exhibit a negative deviation from the linear behavior. The VLE data of the binary mixture satisfy the Fredenlund's consistency test and were well-correlated by the Wohl, nonrandom two-liquid (NRTL), Wilson, and universal quasichemical (UNIQUAC) equations for all of the measured isobars. Interfacial tensions, in turn, were satisfactorily correlated using the Redlich Kister equation.
Compounds
# Formula Name
1 C2H6O ethanol
2 C6H14O 2-methoxy-2-methylbutane
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 1
  • POMD
  • 1
  • Surface tension liquid-gas, N/m ; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Gas
  • Maximal bubble pressure
  • 1
  • POMD
  • 1
  • Vapor or sublimation pressure, kPa ; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Gas
  • Ebulliometric method (Recirculating still)
  • 1
  • POMD
  • 2
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 2
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 1
  • POMD
  • 2
  • Surface tension liquid-gas, N/m ; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Gas
  • Maximal bubble pressure
  • 1
  • POMD
  • 2
  • Vapor or sublimation pressure, kPa ; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Gas
  • Ebulliometric method (Recirculating still)
  • 1
  • POMD
  • 1
  • 2
  • Surface tension liquid-gas, N/m ; Liquid
  • Mole fraction - 1; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Gas
  • Maximal bubble pressure
  • 14
  • POMD
  • 1
  • 2
  • Azeotropic temperature, K ; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Gas
  • By T(X) extreme
  • 3
  • POMD
  • 1
  • 2
  • Azeotropic composition: mole fraction - 1 ; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Gas
  • By T or P extreme
  • 3
  • POMD
  • 1
  • 2
  • Boiling temperature at pressure P, K ; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Gas
  • Ebulliometric method (Recirculating still)
  • 63
  • POMD
  • 1
  • 2
  • Mole fraction - 1 ; Gas
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Gas
  • Gas
  • Liquid
  • Chromatography
  • 63