Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Isobaric Vapor Liquid Equilibrium of 3-Methyl-1-butanol + Ethyl Lactate and 1-Pentanol + Ethyl Lactate at (13.0 and 101.3) kPa

Cepeda, E. A.[Emilio A.], Urbano, C.[Cipriano]
J. Chem. Eng. Data 2011, 56, 5, 2602-2607
ABSTRACT
Isobaric vapor-liquid equilibrium (VLE) data were determined for the binary systems 3-methylbutan-1-ol (3-methyl-1-butanol) + ethyl (2S)-2-hydroxypropanoate (ethyl lactate) and pentan-1-ol (1-pentanol) + ethyl lactate at two pressures (13.0 and 101.3 kPa). The data were obtained using a vapor recirculating-type equilibrium device. Calculations of the nonideality of the vapor phase were made with the second virial coefficients evaluated from the Hayden-O Connell method. VLE experimental data were tested by Herrington and a modified DECHEMA test, which proved their thermodynamic consistency. The activity coefficients and boiling points of the solutions were well correlated with the mole fraction using Wilson, NRTL, and UNIQUAC equations. The mixtures do not present azeotropes.
Compounds
# Formula Name
1 C5H10O3 (S)-(-)-ethyl lactate
2 C5H12O 3-methylbutan-1-ol
3 C5H12O pentan-1-ol
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:4
  • 1
  • POMD
  • 1
  • Vapor or sublimation pressure, kPa ; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Gas
  • Ebulliometric method (Recirculating still)
  • 4
  • POMD
  • 2
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 2
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:4
  • 1
  • POMD
  • 2
  • Vapor or sublimation pressure, kPa ; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Gas
  • Ebulliometric method (Recirculating still)
  • 2
  • POMD
  • 3
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:4
  • 1
  • POMD
  • 3
  • Vapor or sublimation pressure, kPa ; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Gas
  • Ebulliometric method (Recirculating still)
  • 2
  • POMD
  • 3
  • 1
  • Boiling temperature at pressure P, K ; Liquid
  • Mole fraction - 3; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Gas
  • Ebulliometric method (Recirculating still)
  • 50
  • POMD
  • 3
  • 1
  • Mole fraction - 3 ; Gas
  • Mole fraction - 3; Liquid
  • Pressure, kPa; Liquid
  • Gas
  • Liquid
  • Index of refraction calibration data
  • 50
  • POMD
  • 2
  • 1
  • Boiling temperature at pressure P, K ; Liquid
  • Mole fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Gas
  • Ebulliometric method (Recirculating still)
  • 43
  • POMD
  • 2
  • 1
  • Mole fraction - 2 ; Gas
  • Mole fraction - 2; Liquid
  • Pressure, kPa; Gas
  • Gas
  • Liquid
  • Index of refraction calibration data
  • 43