Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Saturated Pressure Measurements of 2,3,3,3-Tetrafluoroprop-1-ene (R1234yf) for Reduced Temperatures Ranging from 0.67 to 0.93

Fedele, L.[Laura], Bobbo, S.[Sergio], Groppo, F.[Fabio], Brown, J. S., Zilio, C.[Claudio]
J. Chem. Eng. Data 2011, 56, 5, 2608-2612
ABSTRACT
2,3,3,3-Tetrafluoroprop-1-ene (R1234yf) is one of the most promising alternative refrigerants because of its low global warming potential and a vapor pressure similar to 1,1,1,2-tetrafluoroethane (R134a). At present, its measured thermodynamic properties are scarce. Herein, vapor pressure data measurements and corresponding correlations are discussed. In particular, 40 vapor pressure measurements in the temperature range between (245.65 and 343.15) K were obtained, and these results, together with available literature data, were regressed using Wagner-type and extended Antoine-type equations. The normal boiling temperature for R1234yf was calculated to be 243.71 K.
Compounds
# Formula Name
1 C3H2F4 2,3,3,3-tetrafluoro-1-propene
2 C2H2F4 1,1,1,2-tetrafluoroethane
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Vapor or sublimation pressure, kPa ; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Gas
  • Closed cell (Static) method
  • 40
  • POMD
  • 2
  • Vapor or sublimation pressure, kPa ; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Gas
  • Closed cell (Static) method
  • 7