Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Densities, Viscosities, and Refractive Indices of 1-Hexyl-3-propanenitrile Imidazolium Ionic Liquids Incorporated with Sulfonate-Based Anions

Ziyada, A. K.[Abobakr K.], Bustam, M. A.[M. Azmi], Wilfred, C. D.[Cecilia D.], Murugesan, T.[Thanapalan]
J. Chem. Eng. Data 2011, 56, 5, 2343-2348
ABSTRACT
A new series of nitrile-functionalized room-temperature ionic liquids (RTILs), incorporating different anions, namely, dioctylsulfosuccinate, dodecylsulfate, benzenesulfonate, sulfobenzoate, and triflouromethanesulfonate, have been prepared and characterized using FTIR-ATR, 1H NMR, and elemental analysis. Their physical properties such as density, viscosity, refractive index, and thermal stability were measured and reported for a temperature range from (293.15 to 353.15) K at atmospheric pressure.
Compounds
# Formula Name
1 C32H57N3O7S 1-(2-cyanoethyl)-3-hexyl-1H-imidazol-3-ium 1,4-bis((2-ethylhexyl)oxy)-1,4-dioxobutane-2-sulfonate
2 C24H45N3O4S 3-(2-cyanoethyl)-1-hexyl-1H-imidazolium dodecyl sulfate
3 C18H25N3O3S 3-(2-cyanoethyl)-1-hexyl-1H-imidazolium benzenesulfonate
4 C19H25N3O5S 3-(2-cyanoethyl)-1-hexyl-1H-imidazolium 3-sulfobenzoate
5 C13H20F3N3O3S 3-(2-cyanoethyl)-1-hexyl-1H-imidazolium trifluoromethanesulfonate
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • CONCYL:UFactor:4
  • 12
  • POMD
  • 1
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 8
  • POMD
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 13
  • POMD
  • 2
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • CONCYL:UFactor:4
  • 12
  • POMD
  • 2
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 8
  • POMD
  • 2
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 13
  • POMD
  • 3
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • CONCYL:UFactor:4
  • 13
  • POMD
  • 3
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 8
  • POMD
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 13
  • POMD
  • 4
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • CONCYL:UFactor:4
  • 13
  • POMD
  • 4
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 8
  • POMD
  • 4
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 13
  • POMD
  • 5
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • CONCYL:UFactor:4
  • 13
  • POMD
  • 5
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 8
  • POMD
  • 5
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 13