Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Densities and Viscosities of Binary Solutions of Benzene-1,3-diol + Water, Ethanol, Propan-1-ol, and Butan-1-ol at T = (293.15 to 333.15) K

Liu, J.[Jingru], Zhu, C.[Chunying], Ma, Y.[Yonguang]
J. Chem. Eng. Data 2011, 56, 5, 2095-2099
ABSTRACT
The densities and the viscosities of benzene-1,3-diol in different solvents of water, ethanol, propan-1-ol and butan-1-ol have been determined under atmospheric pressure and at T = (293.15 to 333.15) K over the mole fraction ranging from 0.0400 to 0.2000 for benzene-1,3-diol + water and 0.0700 to 0.3500 for benzene-1,3-diol + ethanol, propan-1-ol, and butan-1-ol. The measured densities of benzene-1,3-diol solutions showed a good linear relation to the temperature or to the molar concentration, whereas the viscosities of benzene-1,3-diol solutions displayed a nonlinear relation to the temperature or to the molar concentration. The experimental data of densities and viscosities of benzene-1,3-diol solutions were fitted respectively using Gonzles equation and the extended Jones-Dole equation.
Compounds
# Formula Name
1 C6H6O2 1,3-benzenediol
2 C2H6O ethanol
3 C3H8O propan-1-ol
4 C4H10O butan-1-ol
5 H2O water
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 2
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Capillary tube (Ostwald; Ubbelohde) method
  • 5
  • POMD
  • 2
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 5
  • POMD
  • 1
  • 5
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Molality, mol/kg - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Capillary tube (Ostwald; Ubbelohde) method
  • 25
  • POMD
  • 1
  • 5
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Molality, mol/kg - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 25
  • POMD
  • 2
  • 1
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Molality, mol/kg - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Capillary tube (Ostwald; Ubbelohde) method
  • 20
  • POMD
  • 2
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Molality, mol/kg - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 20
  • POMD
  • 3
  • 1
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Molality, mol/kg - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Capillary tube (Ostwald; Ubbelohde) method
  • 25
  • POMD
  • 3
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Molality, mol/kg - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 25
  • POMD
  • 4
  • 1
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Molality, mol/kg - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Capillary tube (Ostwald; Ubbelohde) method
  • 25
  • POMD
  • 4
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Molality, mol/kg - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 25