Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Density, Viscosity, Heat Capacity, Surface Tension, and Solubility of CO2 in Aqueous Solutions of Potassium Serinate

Song, H.-J.[Ho-Jun], Lee, M.-G.[Min-Gu], Kim, H.[Hyuntae], Gaur, A.[Ankur], Park, J.-W.[Jin-Won]
J. Chem. Eng. Data 2011, 56, 4, 1371-1377
ABSTRACT
The density, viscosity, and heat capacity of aqueous potassium serinate solutions were measured over the temperature range from (298.15 to 353.15) K in the mass fraction range of (7.2 to 57.3) %. Each physical property was correlated with temperature and mass fraction, by regression analysis, and the corresponding coefficients for each property are presented here. The surface tension of the aqueous potassium serinate solution was also measured over the mass fraction range of (7.2 to 57.3) % at 298.15 K. In addition, the solubility of carbon dioxide in a 14.3 mass % aqueous potassium serinate solution was measured at (313.15, 343.15, and 373.15) K over partial pressures of CO2 ranging from (0.1 to 400) kPa. It was shown that the aqueous potassium serinate solution could be a good CO2 absorbent because of its high cyclic CO2 absorption capacity. Furthermore, it might be suitable for membrane gas absorption due to its higher surface tension.
Compounds
# Formula Name
1 C3H6KNO3 potassium L-serinate
2 H2O water
3 C2H7NO 2-aminoethan-1-ol
4 CO2 carbon dioxide
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 3
  • Molar heat capacity at constant pressure, J/K/mol ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Small sample (50 mg) DSC
  • 3
  • POMD
  • 3
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Concentric cylinders viscometry
  • 3
  • POMD
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Pycnometric method
  • 3
  • POMD
  • 2
  • 1
  • Surface tension liquid-gas, N/m ; Liquid
  • Mass fraction - 1; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Air at 1 atmosphere
  • Maximal bubble pressure
  • 5
  • POMD
  • 2
  • 1
  • Molar heat capacity at constant pressure, J/K/mol ; Liquid
  • Temperature, K; Liquid
  • Mass fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Small sample (50 mg) DSC
  • 55
  • POMD
  • 2
  • 1
  • Viscosity, Pa*s ; Liquid
  • Mass fraction - 1; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • CONCYL:UFactor:4
  • 35
  • POMD
  • 2
  • 1
  • Mass density, kg/m3 ; Liquid
  • Mass fraction - 1; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Pycnometric method
  • 35
  • POMD
  • 4
  • 3
  • 2
  • Mole fraction - 4 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Mole fraction - 3; Liquid
  • Liquid
  • Gas
  • pressure drop
  • 16
  • POMD
  • 4
  • 2
  • 1
  • Mole fraction - 4 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Mole fraction - 2; Liquid
  • Liquid
  • Gas
  • pressure drop
  • 24